-
Thanks for that
I currently have sports match 30mm reach fwds 2 piece mounts in
Med 'A'= 15mm
High 'A'= 21mm
and a pair of risers that can add 13mm to either so should be ok till i can work out the weaver set up
I will stick a sling stud in to fit my Harris bipod for now but it shouldn't be to difficult to fit a picatinny rail parallel to the barrel the full length of the fore stock but we will see
ATB
Duncan
-
grouping issues
I had an fx royal that would not group at all. As i was going to use it for hft so i made a single shot adaptor. When using the adaptor it grouped very very well so the problem was found to be in the magazine. I think FX make a generic magazine that has to cater for normal guns and their automatic variants. The automatic variants need a mag that will operate fast and efficiently in an auto so I think they just beefed up the mag rotation spring. I did some tests by loading a pellet via the mag and then removing the pellet from the breach with a rod from the muzzle end. I found quite a few deformed pellet skirts so the mag is the culprit
The solution was to weaken the spring in the mag. Accuracey restored. hth
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules