another FWB sport

[mallyally]

I have another FWB 127 to rebuild this week / must be at least my 30th
Andy at our club bought it cheap
usual problems twaaaaaaangy goes off when you push off safety catch no first stage lacking power and graunchy as frigg on cocking

HEAVEN TO ME GUYS just started to strip it down tonight nothing at all that cant be fixed

[Grayling]

Wheres the piccies Malcolm, come on megawooly get with the programme .
Is that the one you were waiting to here about last time I was at yours mate ??

[mallyally]

Here you go gaz just for you
wanna come round and rebuild it

That other one fell through mate but I think I have enough

[MattyBoy]

Here you go gaz just for you
wanna come round and rebuild it

That other one fell through mate but I think I have enough

Is that a piece of cheese lower centre right?

[Grayling]

Here you go gaz just for you
wanna come round and rebuild it

That other one fell through mate but I think I have enough

With us being old pals Malcolm you should give me one of your numerous FWBs maybe even your Mastersport . Although any would do .

[JamesDunn93]

Any advice on tuning a sport 124 mate?
Cheers

[mallyally]

Is that a piece of cheese lower centre right?

hard cheese wish i had a quid for every one that came out like that

[MattyBoy]

hard cheese wish i had a quid for every one that came out like that

Indeed

[mallyally]

Thats the cylinder polished wet and dry then scotchbrite

[bigtoe01]

Thats the cylinder polished wet and dry then scotchbrite

Interested you have done this...would it not be better to hone the cylinder with say 240's or 320' stones rather than risk dips etc in the finish?

or have you never had an issue doing this?

[El Garro]

Hi, is that a standard trigger blade on the one in the first picture ?

[mallyally]

Interested you have done this...would it not be better to hone the cylinder with say 240's or 320' stones rather than risk dips etc in the finish?

or have you never had an issue doing this?

You would have to rub it for about a year with scotchbrite to put dips in the cylinder that would cause problems
dont like to use stones as the finish they give is too rough for me prefer to polish

[mallyally]

Hi, is that a standard trigger blade on the one in the first picture ?

yes standard MK2 trigger

[El Garro]

I zoomed in on the pic after I asked the guestion. Doh.
Thanks anyway

[mallyally]

just put it back together AGAIN sorted out all the trigger issues then assembled it with a HW95 spring
smooth as silk but a little bit underpowered
so knowing whose gun it is i decided to use the original long one
still smooth but aren't they an absolute bitch to get in there
and power is no problem