Guys I have a rohm twinmaster top that's leaking, shots ok but 24 hours after full charge cylinder is empty. I have changed the cylinder seal with no luck anybody else have any ideas.
Guys I have a rohm twinmaster top that's leaking, shots ok but 24 hours after full charge cylinder is empty. I have changed the cylinder seal with no luck anybody else have any ideas.
Hi, PM magicniner on the umarex boys club forum, im sure he will be able to help.....
ATB John.
Thanks buddy
Could be the reg seal or the hammer valve. Try some soapy water or worst case dunk it in a bowl of water.
By the way magicniner is also on this bbs.
If the cylinder holds air OK off the gun the firing valve seat is the most likely area for a leak.
A full strip, clean and relube of the firing valve may well sort it unless a seal has physical damage, stripping, cleaning & relubing the reg is worth doing whilst the pistol is apart.
Clean all components thoroughly and lightly coat only the O rings with silicone grease,
- Nick
Airgun Repairs, Bespoke Airgun Smithing and Precision Engineering Services
http://www.magic9designltd.com