Quote Originally Posted by Matt View Post
Regards people not liking the styling, each to their own really I don't mind it,although I didn't like it when I first saw the prottype pics.

Have been told the stock is easily removable, so may have a look at getting a one piece design made or even see if a metalk back-end could be created similar to a Steyr / FWB.

Cocking the rifle is not clunky as per the video in the other thread, it's slightly stiff to return the lever but I expect this to improve with use, the trigger is also very nice - I need to have a look at shortening the first stage but the second stage let off point is superb, no creep and very predictable ( this is coming from an over fussy FT shooter).

regards,

Matt
I reckon the styling on these is a grower, personally I quite like them, but I like hw100s and rapids Daystate huntsman and s400 are too boring and run of the mill for me!

regarding travel on the 1st stage of the trigger, if it is governed in a similar way to the t06 on the diana springers I replace the forward slotted screw with a m3 grub screw so it can wind in further. This reduces the sear engagment of the first stage meaning the trigger has shorter travel to the trip point to which you adjust the rear screw until the second stage pressure coincides. Hope that makes sense!

nice gun, atb max