Results 1 to 15 of 15

Thread: Webley Longbow down on power

Hybrid View

Previous Post Previous Post   Next Post Next Post
  1. #1
    Randy Bohannon's Avatar
    Randy Bohannon is offline “Junes1 is a whining bellend”
    Join Date
    Jan 2007
    Location
    London
    Posts
    28,522

    Webley Longbow down on power

    Gents,

    Spent a fantastic afternoon plinking and teaching my little brother to shoot with the above rifle.

    I bought it new in 2005-2006 and it's had about a tin of pellets through it since.

    I put it over the chronograph out of curiousity and found that it producing a mighty 6.8 ft/lbs on average.

    Is this about right for these rifles or has the spring become knackered in storage?

    I have never stored it cocked.

    Can I simply drop a new spring in or is it worth getting one of these tuning kits I've seen advertised?

    TIA,
    Last edited by Randy Bohannon; 06-04-2012 at 07:32 PM. Reason: Doh, Ft/lbs not fps....
    "An infinite number of monkeys banging away at type writers for an infinite period of time will eventually reproduce Hamlet" Thanks to discussion forums we now know this to be untrue.

  2. #2
    barrel's Avatar
    barrel is offline Work is the refuge of people who have nothing better to do
    Join Date
    Jul 2008
    Location
    Edinburgh
    Posts
    9,045
    Quote Originally Posted by Randy Bohannon View Post
    Gents,

    Spent a fantastic afternoon plinking and teaching my little brother to shoot with the above rifle.

    I bought it new in 2005-2006 and it's had about a tin of pellets through it since.

    I put it over the chronograph out of curiousity and found that it producing a mighty 6.8 fps on average.

    Is this about right for these rifles or has the spring become knackered in storage?

    I have never stored it cocked.

    Can I simply drop a new spring in or is it worth getting one of these tuning kits I've seen advertised?

    TIA,


    6.8fps, that is low. May as well throw the pellets. On a serious note that is very very low, i would strip the rifle and have a look.


    Barrel
    IF I WALKED ON WATER PEOPLE WOULD SAY I COULD NOT SWIM !

  3. #3
    secretagentmole Guest
    Get a kit, it will probably need new washers and seals as well if it has never been serviced!

  4. #4
    Join Date
    Feb 2001
    Location
    Winchester, UK
    Posts
    15,366
    A Webley Longbow in fine fettle is more than capable of producing output power up to the legal limit, so there is definitely something amiss with your particular rifle.

  5. #5
    Join Date
    Nov 2004
    Location
    Near Reigate, Surrey
    Posts
    19,500
    Quote Originally Posted by Randy Bohannon View Post
    Gents,

    Spent a fantastic afternoon plinking and teaching my little brother to shoot with the above rifle.

    I bought it new in 2005-2006 and it's had about a tin of pellets through it since.

    I put it over the chronograph out of curiousity and found that it producing a mighty 6.8 fps on average.

    Is this about right for these rifles or has the spring become knackered in storage?

    I have never stored it cocked.

    Can I simply drop a new spring in or is it worth getting one of these tuning kits I've seen advertised?

    TIA,
    You certainly need to strip the rifle. I suspect a faulty piston seal rather than a knackered spring. You haven't shot enough pellets through this rifle for it to be a spring problem. When you open it up it should be pretty obvious what is wrong.
    'It may be that your sole purpose in life is to serve as a warning to others'.

  6. #6
    Randy Bohannon's Avatar
    Randy Bohannon is offline “Junes1 is a whining bellend”
    Join Date
    Jan 2007
    Location
    London
    Posts
    28,522
    Thanks lads.

    The manual seems to have become lost in the mists of time, is there a guide to stripping it on 'tinternet?
    "An infinite number of monkeys banging away at type writers for an infinite period of time will eventually reproduce Hamlet" Thanks to discussion forums we now know this to be untrue.

  7. #7
    Join Date
    Aug 2011
    Location
    st neots
    Posts
    1,148
    does it make a loud mechanical 'clack' on firing? if so, chances are its the piston seel.

  8. #8
    Randy Bohannon's Avatar
    Randy Bohannon is offline “Junes1 is a whining bellend”
    Join Date
    Jan 2007
    Location
    London
    Posts
    28,522
    Quote Originally Posted by longbow72 View Post
    does it make a loud mechanical 'clack' on firing? if so, chances are its the piston seel.
    I don't think so.

    It seems pretty smooth in firing but I shoot a 8lb 30.06 for 9 months of the year so the comments I've read about harsh recoil from spring rifles is a bit beyond me at the moment.


    Thanks for your replies chaps.
    "An infinite number of monkeys banging away at type writers for an infinite period of time will eventually reproduce Hamlet" Thanks to discussion forums we now know this to be untrue.

  9. #9
    Join Date
    Jul 2000
    Location
    Derby
    Posts
    6,499
    Quote Originally Posted by Randy Bohannon View Post
    Thanks lads.

    The manual seems to have become lost in the mists of time, is there a guide to stripping it on 'tinternet?
    Here you go Amir!

    http://www.airrifleshop.co.uk/Manual...ey_Longbow.pdf

    Look after that Longbow, if it's a Birmingham made one, it's a classic and there won't be any more...

    Good luck with it!

  10. #10
    Join Date
    Sep 2007
    Location
    Winchmore Hill, London
    Posts
    1,370
    If you want to tune it on the cheap, piston seal from maccari in the US, POK! on here for the spring (if original spring is good then re-use), send the lot to someone like UK Neil for spring guides / top hat & to button the piston / size the piston seal.
    www.savedeathrowdogs.co.uk Very urgently need homes for: Male staff cross, approx 1 year old, will be neutered, very loving but not great with other dogs. Stuck in pound. 2) 2 year old male choc lab. 3) 2 year old cockerpoo. 4) 20 border collies .

  11. #11
    Join Date
    Aug 2011
    Location
    st neots
    Posts
    1,148
    Quote Originally Posted by Space Cadet View Post
    If you want to tune it on the cheap, piston seal from maccari in the US, POK! on here for the spring (if original spring is good then re-use), send the lot to someone like UK Neil for spring guides / top hat & to button the piston / size the piston seal.
    and open up the transfer port just a little, they are a bit on the small side.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •