surface rust on the barrel?

[secretagentmole]

Aluminium foil and gun oil works well!

[angrybear]

Oiled Scotchbrite also works well (the green kitchen scouring pads) I always spray em with wd40.

[Calz]

cheers guys! will need to touch up the bluing also any ideas, are the DIY kits any good? cheers

[bighit]

cheers guys! will need to touch up the bluing also any ideas, are the DIY kits any good? cheers

i used the little glass pot one my local gunshop had . cant remember the name though. its like a gel you rub on with a cloth then wipe off as it goes grey then wash off with a little water then use a little oil on a cloth and it comes up not too bad


p.s its called philips gun blue

[pbranthwaite]

Try an oily rag first, if that fails I use the finest grade wire wool.

HTH Pete