Reply With QuoteIt sounds like your valve is leaking, could be something as simple as debris on the seat.
Registered User
just realised that i should have posted this thread here - d'oh!...
I've got an eb20 pistol and wondered where is best to send it to get fixed?
i bought it a while ago off a fellow from BBS, but its never been right, as it leaks co2 everywhere (mainly from the barrel and breech) when i put a co2 cartridge in it
thought it might need some new seals, etc. but the unit itself seems pretty enclosed/ sealed to me and maybe co2 guns need different parts/ seals from pcp? plus might be better in the hands of someone who specialises in these little beauties!
anyway, if you guys can recommend someone or a shop, it would be much appreciated?
ATB
Jon
'Windage & Elevation, Miss. Langdon - Windage & Elevation!'
Donor Fixer
It sounds like your valve is leaking, could be something as simple as debris on the seat.
Registered User
The valves in Sheridan/ Benjamin CO2 pistols are built in to the gas tube and tricky to work on; at a guess not economical to have fixed unless a skilled amateur can help. It's worth putting one or two drops of oil ( I use ATF - automatic transmission fluid ) on the nose of a new gas capsule and running it through ie do some shooting or repeated dry firing. As Lightning22 says it might just be dirt, gunge etc.
good luck
torrens
Registered User
cheers guys - i'll give it a go and see if it resolves the problem!
'Windage & Elevation, Miss. Langdon - Windage & Elevation!'
Registered User
If you do find it needs strippin' and resealin'
your best man is here >
http://www.airgunbbs.com/member.php?...awrie-Amatruda
HIH
Pete
ULTIMATE KING RATTY::.22 SMK QB78DL HYBRID::+QB78 D/L .25 Cal
::850 AIRMAGNUM::PISTOLS-
Registered User
superstar! cheers Pete
Jon
'Windage & Elevation, Miss. Langdon - Windage & Elevation!'
Posting Permissions