Fwb 65/80 pistols

[Burg308]

Can anyone advise me on trigger adjustment on the 65/80 pistols,I have purchased a tatty ,well used 65,shoots really well but a lot of the paint Finish to the lower receiver is missing.have seen pictures of this part polished,is the finish hard to remove any advise .

[18 Wheeler]

Can anyone advise me on trigger adjustment on the 65/80 pistols,I have purchased a tatty ,well used 65,shoots really well but a lot of the paint Finish to the lower receiver is missing.have seen pictures of this part polished,is the finish hard to remove any advise .

FWB Mod.65 trigger adjustment, courtesy of Pilkguns.

There is also a downloadable pdf file of the FWB 65 Manual at the bottom of the linked page.

Was the information re. mod65 vs. 80 in your previous thread of any use?

[Burg308]

Thanks for your help,most helpful.
Atb mitch

[apipper]

only adjust in small amounts, and when you are happy with it, cock it and bang the grip (while pointing at a target),to make shure you have not adjusted it to light, (it will go off), or the one i had about 10 years ago would, one quarter turn back and that should be right, normally set very well streight out the box


del