FWB Mod.65 trigger adjustment, courtesy of Pilkguns.
There is also a downloadable pdf file of the FWB 65 Manual at the bottom of the linked page.
Was the information re. mod65 vs. 80 in your previous thread of any use?
Can anyone advise me on trigger adjustment on the 65/80 pistols,I have purchased a tatty ,well used 65,shoots really well but a lot of the paint Finish to the lower receiver is missing.have seen pictures of this part polished,is the finish hard to remove any advise .
FWB Mod.65 trigger adjustment, courtesy of Pilkguns.
There is also a downloadable pdf file of the FWB 65 Manual at the bottom of the linked page.
Was the information re. mod65 vs. 80 in your previous thread of any use?
Thanks for your help,most helpful.
Atb mitch
only adjust in small amounts, and when you are happy with it, cock it and bang the grip (while pointing at a target),to make shure you have not adjusted it to light, (it will go off), or the one i had about 10 years ago would, one quarter turn back and that should be right, normally set very well streight out the box
del