Help reparallaxing scope

[Elliott]

I have a Hawke Frontier 3-9x40 that I've just fitted to my HW77K. Can someone please explain how I reparallax to say 30yds? What do I need to adjust and how do I go about doing it?

Thanks in advance

[Freddienc29]

There should be an introduction to zeroing and parallex with the scope instructions.

I have a nikko sterling 3-9x40AO

I set the magnification to 5x, the AO to 25yards and zeroed the scope to 25 yards.

Seemples...

[Chandlers]

See here.

Borrowed from 18 wheeler on another thread(re-parallaxing zeiss)

[monty57]

See here.

Borrowed from 18 wheeler on another thread(re-parallaxing zeiss)

thanks a great help with that link i didn't know you can do that will be checking all my scopes now , well the fixed lens ones that is.

[Elliott]

Thanks guys!

Used a hairdryer on the objective end and managed to unscrew the collar, turned around 3/4 clockwise just using my fingers and relocated the collar.. yey no disaster! Finally, something that was pretty straightforward

[POK!]

wrong way! it takes approx 1/3 - 1/2 turn anti-clockwise from factory 100yds

[Freddienc29]

There should be an introduction to zeroing and parallex with the scope instructions.

I have a nikko sterling 3-9x40AO

I set the magnification to 5x, the AO to 25yards and zeroed the scope to 25 yards.

Seemples...

Sorry, misread the OP

[Elliott]

wrong way! it takes approx 1/3 - 1/2 turn anti-clockwise from factory 100yds

Hi POK! I was looking through it whilst adjusting so it was clockwise the way I was looking through, or anti-clockwise if I was looking directly at the objective lense. Either way its sorted