Gamo Centre and Target Pistol

[I. J.]

Ive had a chance to think about a new alloy loading port recently Well, Ive had plenty of time to think (and its a habit I may get into. )
The bore size of the loading post will have to be critical. To large and the pellet will fall through like it presently does with many of the standard plastic ports. To small and it may act as a sizer and the pellets diameter could be smaller than the barrels bore.
Just my thoughts.

ATB
Einstein.

[mikec4]

Well, Ive had plenty of time to think (and its a habit I may get into. )
ATB
Einstein.

Which end did they operate on Ian?? Someone turn the table round??

[pegasus]

Ive had a chance to think about a new alloy loading port recently Well, Ive had plenty of time to think (and its a habit I may get into. )
The bore size of the loading post will have to be critical. To large and the pellet will fall through like it presently does with many of the standard plastic ports. To small and it may act as a sizer and the pellets diameter could be smaller than the barrels bore.
Just my thoughts.

ATB
Einstein.

Hi there, Get a few prototypes made with slightly different bore sizes,then produce the one that is nearest,bearing in mind that different pellet types have different thickness of skirts, the pressure of air will expand the thin skirt better giving a tighter seal in the bore, it will probably involve quite a bit of trial and error but it will be worth it in the end Good luck John

[I. J.]

Which end did they operate on Ian?? Someone turn the table round??

They wanted to remove all my badness! There wouldn't have been enough of me left to pull the trigger.

Hi there, Get a few prototypes made with slightly different bore sizes,then produce the one that is nearest,bearing in mind that different pellet types have different thickness of skirts, the pressure of air will expand the thin skirt better giving a tighter seal in the bore, it will probably involve quite a bit of trial and error but it will be worth it in the end Good luck John

Or just hold the pistol level as you put your pellet in.

ATB
Ian

[mikec4]

Or just hold the pistol level as you put your pellet in.

ATB
Ian

Took you long enough to work that out......

ATB

RTM (appointed by default )

[I. J.]

Took you long enough to work that out......

ATB

RTM (appointed by default )

It just goes to prove you cant be good looking AND intelligent. [and yes, I did double check the spelling.]

ATB
Ian

[mikec4]

It just goes to prove you cant be good looking OR intelligent. [and yes, I did double check the spelling.]

ATB
Ian

Sorted that for you

[zooma]

Get those GAMOS out - MPS Round 3 next week!