Pro Target Advice - Seal Kit

[rockdrill]

The EV2 Mk1/2/3 regulator internals are the same as the Mk3 Pro-Target regulator - i.e. the silver bodied version with 7 engraved rings on it. EV2 trigger parts are also common to the Pro-Target. Not sure if they have changed the design in the latest version though.

The much older RN10 regulators which are brass or alloy bodied with a sticker wrapped around them are long since unavailable for factory parts.

Check the EV2 manual pdf on AA's website, go into the parts listing, any parts that use an 'RN' prefix are parts common to the RN10/Pro-Target as the EV is a redesigned Pro-Target.

As to AA, try phoning and if possible speak to Sheila, if she is still with, them as she knew the parts listings very well.

[Abbridale]

FAO Fellow Air Arms Pro Target owners, well guys I have just spoken to Air Arms direct and can confirm that they will still service the pro target and repair/replace any faulty regulators....so good news all round.

[zooma]

FAO Fellow Air Arms Pro Target owners, well guys I have just spoken to Air Arms direct and can confirm that they will still service the pro target and repair/replace any faulty regulators....so good news all round.

Now that is much better news!

Good job Air Arms - keep it up - air weapons can last for decades!

[gov.radio]

FAO Fellow Air Arms Pro Target owners, well guys I have just spoken to Air Arms direct and can confirm that they will still service the pro target and repair/replace any faulty regulators....so good news all round.

Thanks for the info mate, but AirArms seem to be telling different stories and making some people look like LIARS, and I'm not too happy about that! My mate Stuart, who owns the Pro Target that I am trying to get an O-Ring Service kit for, has an email FROM AIR ARMS stating that they do NOT service the Pro Target anymore nor do they provide service kits for them... I will get him to forward me the email from AirArms and publish it on here, because I am severely P***** Off with Air Arms - they seem to tell some people one thing and other people another when it suits them!!

Why is it so hard to get a ******* O-Ring Service Kit for this gun if it's sooooooooooooo supported by AA??????????????????????? I've spent hours trying to track one down!!!!!!!!! REALLY P***** Off with AA.....

[zooma]

Thanks for the info mate, but AirArms seem to be telling different stories and making some people look like LIARS, and I'm not too happy about that! My mate Stuart, who owns the Pro Target that I am trying to get an O-Ring Service kit for, has an email FROM AIR ARMS stating that they do NOT service the Pro Target anymore nor do they provide service kits for them... I will get him to forward me the email from AirArms and publish it on here, because I am severely P***** Off with Air Arms - they seem to tell some people one thing and other people another when it suits them!!

Why is it so hard to get a ******* O-Ring Service Kit for this gun if it's sooooooooooooo supported by AA??????????????????????? I've spent hours trying to track one down!!!!!!!!! REALLY P***** Off with AA.....

Lets hope Air Arms read BBS and take care of the source of wrongful information to clear the matter up once and for all.

I guess it's fair to say since we have had two completely opposing answers we still don't know for sure which one to believe - but I prefer the last positive one the best!

[Abbridale]

Colin
In your mates defence when I spoke to Air Arms this morning they did say that they don't do a 'Service Kit' for the Pro Target but would only be too happy to service/repair the gun if it was sent to them. I don't think they are trying to make people look like liars it was just probably down to misinterpretation. I hope so anyway as I've just parcelled my action up and about to send it off to sunny Hailsham for yet another holiday, just for your information I was quoted £40 for the repair of the reg.
ATB
Dave

[gov.radio]

Colin
In your mates defence when I spoke to Air Arms this morning they did say that they don't do a 'Service Kit' for the Pro Target but would only be too happy to service/repair the gun if it was sent to them. I don't think they are trying to make people look like liars it was just probably down to misinterpretation. I hope so anyway as I've just parcelled my action up and about to send it off to sunny Hailsham for yet another holiday, just for your information I was quoted £40 for the repair of the reg.
ATB
Dave

Thanks for the info again Dave - What it appears is that AA do not do the service themselves, but pass it to a third party to carry out any servicing to the Pro Target... I don't know yet if that is definately the case, but I will confirm when i find out for certain.
I have spoken to Stuart on the phone (owner of the Pro Target) and he tells me that he has the reply email, which his son sent to AA. Also, there is a reliable member on here that also contacted AA to confirm the information Stuart received in the email, and he was given the same information as Stuart. I will not mention his name, but hope that he reads this and confirms the information received from AA...

As far as i'm concerned, AA have been a farce with their "mis-information" which seems to change depending on who they speak to or who answers the phone! I've purchased AA guns for many years, but Customer Care seems to be slipping, so I doubt very much if I will buy any more AA guns in the future... Shame it's got me feeling like that, but thats the way it is...

Cheers Dave...

[rincewind]

This maybe clutching at straws but have you asked AA to let you have the dimensions and material specifications for the seals that you require. This information must still be on their files!