Results 1 to 13 of 13

Thread: Feinwerkbau Rifle Case

  1. #1
    Join Date
    Mar 2010
    Location
    Rossendale and Formby
    Posts
    3,919

    Feinwerkbau Rifle Case

    Does anyone know where I can buy a genuine Feinwerkbau rifle case at a fair price?

    The type sold for the 700 or included with the 800 would be perfect as it is not actually "fitted" and so would be the perfect case for my "as new" FWB603 as I want to spoil it and keep it looking this way.
    www.bobsairguns.com - also the host site for Rossendale Model Target Club since April 2011. Hope to add more pictures and update this site during my retirement

  2. #2
    defblade is offline There's a hole in my bucket, dear Liza, dear Liza
    Join Date
    Nov 2005
    Location
    Llanelli/Carmarthen way
    Posts
    212
    I've had great trouble finding a rigid case to take my 603. The length and height are fine, but the pump handle makes it much wider than your average gun; rigid cases don't allow for this well. Measure carefully before purchase!
    FWB 102 - still my favourite; BSA Meteor for daughter (and rats ); TX200 with a scope on top - nicest springer I've ever fired
    New in: Baikal MP-651K pistol

  3. #3
    Join Date
    Mar 2010
    Location
    Rossendale and Formby
    Posts
    3,919
    I will check the case my Walther Anatomical came in - I am told these are better made in any case ( sorry - no pun intended) and maybe they are a little deeper (?) - but I have not seen a "proper" Feinwerkbau 700 type case to be sure about this.

    If the genuine FWB case is deep enough - at least it would have the right name on it!
    www.bobsairguns.com - also the host site for Rossendale Model Target Club since April 2011. Hope to add more pictures and update this site during my retirement

  4. #4
    mrfixit is offline There's many a slip twixt trousers and skip
    Join Date
    Apr 2006
    Location
    Bolton
    Posts
    2,006
    I used my Walther case for my 601.
    Home Page:
    [url]http://www.rivington-riflemen.eu

  5. #5
    Join Date
    Aug 2012
    Location
    coventry
    Posts
    11

  6. #6
    Join Date
    Mar 2010
    Location
    Rossendale and Formby
    Posts
    3,919
    Quote Originally Posted by daver777 View Post
    Thanks for that Dave - I have sent them an email to check stock and delivery.
    www.bobsairguns.com - also the host site for Rossendale Model Target Club since April 2011. Hope to add more pictures and update this site during my retirement

  7. #7
    Join Date
    Jan 2017
    Location
    stevenage
    Posts
    42
    Does the Feinwerkbau 800X come with a hard case?

  8. #8
    Join Date
    Jan 2003
    Location
    Ringwood
    Posts
    3,981
    I have a Steyr one you can have for 40 plus post and a Walther one for 30 plus post.
    Remember, it is the strongest character that God gives the most challenges.

  9. #9
    Join Date
    Feb 2009
    Location
    Gt Yarmouth
    Posts
    1,014
    Bob

    If there is such a thing as a genuine FWB case for the 800 I'm sure Ian at Centra UK (FWB importer) would get one for you. Personally I use Walther cases for all ours, Walther or not, as we travel a lot with rifles and they are very tough. You can also get two rifles in one case. The wife has dropped a cased rifle down the stairs (accidentaly, not to test it!) and both rifle and case came out unharmed.

    And the other bonus is when you see sense and buy the correct rifles you then have a case with the correct name on!

    Have Fun
    Robin
    Steyr LP2 Short - Walther CP2 - Walther LPM1 - Walther LP53 - Feinwerkbau 65 - FAS 604 - Walther LGV - Walther LGR - Walther LG400 Alutec - Walther KK300 Alutec - Swing 7.62 mm in Walther stock. - Keppeler 6 mmBR with Walther grip and wood!

  10. #10
    Join Date
    Dec 2013
    Location
    Sheffield
    Posts
    11
    The 800 X does come in its own hard case.

  11. #11
    Join Date
    Oct 2012
    Location
    Nottingham
    Posts
    235
    Not sure what the taxes and postage would come to, but the FWB cases are made by Negrini in Italy.

    I think this is the same model as the Buinger one, but un-branded.

    http://www.negrinisrl.com/en/product/1640-c-isy-2/
    I love my wife more than any pig...

  12. #12
    Join Date
    Jan 2017
    Location
    stevenage
    Posts
    42
    Yes the 800X comes with its own case but I'm now needing to find a wider hard case as the rifle with scope on doesn't fit. Needs about another 2" in width.

  13. #13
    Join Date
    Mar 2010
    Location
    Rossendale and Formby
    Posts
    3,919
    This is a really old thread now - but as it has been resurrected again - I thought I should let anyone that may be interested know that I bought a genuine new FWB rifle case from Buinger some time ago and it arrived within a couple of weeks and has been in use to keep my FWB 700 safe ever since.
    www.bobsairguns.com - also the host site for Rossendale Model Target Club since April 2011. Hope to add more pictures and update this site during my retirement

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •