Chairgun help please
I'm trying to get my head around moa's etc on the hawke chairgun program so perhaps someone out there can teach a numpty about the obvious I'm not getting!!
Ok its a rapid.22, pushing 34.48 ftlbs, 847.3 ft/sec, bis mags at 21grains, 45 yd zero on x6mag, wearing a viper 4-12x44 scope.
The scope is 1/8th " adjustment at 100yds per click, so in the MOA/Clicks box I've entered 1/8th @100yds.
I haven't yet worked out the bc of the pellet, until I do, I'm just using the default BC.
What I'm trying to workout from the table is how to read the turret marks. For example @70 yds according to the table is 4.56 Moa or 38 clicks. That corresponds with the no9 marker on the turrets.
If I go to 4.5 on the turret markins that corresponds with 18 clicks.
Obviously testingand a logging the poi with the turret markers will be the most accurate way to calibrate the turret markings. But an ouline to understand it would be very helpful.
Thanks
T33
Good deals with: Martini1215, Stealth, kungfubob, Johnny k, Treeman, Ferrets Bueller, Stormraider77, Cornishcreek, Learningcurve.