TR140...anyone using this...thinking that it will be a good replacement (and cheaper) than n130 that i use for 308 at the mo...also wondered if it would be any good for 303, as i dont want to double up on powder...?
thanks
jon
TR140...anyone using this...thinking that it will be a good replacement (and cheaper) than n130 that i use for 308 at the mo...also wondered if it would be any good for 303, as i dont want to double up on powder...?
thanks
jon
'Windage & Elevation, Miss. Langdon - Windage & Elevation!'
I use this in my 308win its very like N140 but its £50 per kg. Can send you some load data if you want
Dont no about 303 tho it should be ok
There seem to have been many discussions about whether TR140 was the same/similar to N140. I do know several people who use N140 (but not N130) in both .303 and .308 quite successfully.
The first dozen posts on this thread might be of interest:
http://www.full-bore.co.uk/viewtopic.php?f=11&t=6754
and here too:
http://ukvarminting.com/forums/index...ic=15081&st=20
but I expect you will have seen these already!
thanks all - just looked those posts up - cheers!
i meant n140 (typo error )
i'll work up some loads and see how i get on...
ATB
Jon
'Windage & Elevation, Miss. Langdon - Windage & Elevation!'
This load date for .308win. If you find a load for N140 for .303 you can use this but you must use the start load with Tr140 dont
just goto the max load. What weight bullet you using with the .303
http://shootingshed.co.uk/wp/2012/04/tr140-load-data/
I use TR140 for 7.62 and .303.
It is not the same as N140.
I'd email the supplier for data:
commonside@compuserve.com I think.
We have always known there were two Britains: one extraordinarily pleasant, inhabited by mild, tolerant, kindly people; the other utterly disgusting, inhabited by brutal and malevolent louts. Auberon Waugh
The lad that sold me the powder mate over at fox firearms told me you could do this, he no what he on
about. You should start with a start load anyway just to be on the safe side.