No problems, thanks for the reply.
No problems, thanks for the reply.
Mine lives in its carry case closed up untouched for months at a time. If it proves a little reluctant to compress/hold air a drop of oil in the cylinder inlet hole usually sorts it. Never had a problem with the breech seal.
Jef
AKA Porthos, a Piskateer of Renown.
I am a pistaholic, and proud of it
Well there was no way I was waiting until Christmas to have a go so I set up a 6yd range in the house today to give it a try. Sadly it seems as thought there is a fault with mine. I know there is no safety but when the gun is cocked, loaded and then fired, you can feel the air venting from the side of the gun and the pellet has not moved at all. Has anybody else had this problem? Is there some thing I have missed before loading the pistol? Gutted to say the least!
Never had this problem with mine, I'd take it back if I were you.
Oh dear. That sounds like the sort of problem they had with this type of pistol when it was first introduced as the PR15. I had one back in 1989 and it leeked. I swapped it at the shop for a Crossman 1322 at the time. I thought that they had fixed the problems though as I bought a second hand Compact a couple of years ago and it has been perfect. A really great value pistol. I guess it might be worth giving it a squirt of Pelgun Oil and see if that make it seal. However, it could be that there is a small burr somewhere which has sliced the O ring on assembly. Such a shame that these sort of faults find their way out of the factories still.
ATB
Andy.
Sorry to hear this. I can imagine how you feel as I've just had to send back my HW45 ( broken spring) only bought in April. Should get it back today but you shouldn't have hassle with new guns. I don't think you're missing anything. Sounds like a seal fault to me. I bought my Compact second hand and touch wood its been great. If all you're doing is opening, loading, closing and firing thats all there is to it. I feel for you, but it'll have to go back. I personally would try a couple of drops of pellgunoil or magic9 oil in the air intake hole first. Pump the barrel arm to disperse and try some shots. It could possibly be that the seals are dry. ATB. Pete.
Knowledge is knowing a tomato is a fruit. Wisdom is not putting it in a fruit salad.
Cheers chaps, another trip to McAvoys for me.
Looks like we were posting at the same time Andy. You just beat me to the oil idea.
Knowledge is knowing a tomato is a fruit. Wisdom is not putting it in a fruit salad.
When I took my old Compact to the gun shop with this problem a month or two back, this is the procedure they tried first, and it worked!
My one (1989 vintage) lived for most of it's life in the packaging it came in (Formed polystyrene and cardboard) In a wardrobe at the seaside - wooden bungalow. Often frozen as the bungalow is not heated. Only recently moved to a warmer house and put in a padded locked case. Seems fine.
Lovely gun BTW.
How tight is the pellet. I've had Compacts which don't like certain tight pellets and vent air out through the breech.
Remember, these are not the most powerful of pistols.
Bob
All of us could take a lesson from the weather. It pays no attention to criticism.
BARPC
Basingstoke Air Rifle & Pistol Club. Founded 1975
The pellet did feel quite tight but they are the ones supplied in the box made by Gamo. I am of half a mind to keep the pistol and solve the problem myself, after all I was going to smooth the sear faces and change the adjuster screw anyway, plus dismantling the gun and doing a bit of maintenance means I will know the insides of the gun better. It's a difficult one as I don't think McAvoys had any more in stock so a replacement would have to wait 'til after Christmas and I was pretty much settled on my choice of gun.