I've had a few of these pass through my paws in the last few years. I can appreciate that they are cheap but they are crappy and pretty much "throwaway"
Luckily, A few of them have been really cheap or even free/postage only.
had a crosman 766 and 761xl, both of which were given away. Self tapping screws
had a broken Manuarm, which is more or less a larger diameter cylinder RO72. That got broken for spares. I think the piston washer went to Punchsteve and he other bits for spares for an RO72.
The RO72's haunted me for a while. As quickly as I got rid of one, another would turn up, both the long and short barreled versions, with and with out the rod shoulder stock.
On one the rubber piston washer was knackered and I made a leather on to get the gun working with out the "piston weight" somebody had fitted to try to get it to work. Another 2 went to my nephew and another for my mates lad. With the crappy piston and cocking arm and awful trigger/trigger spring, they are pretty awful guns.
The Ro71---even crappier and worse!!
Heathways topscore 175. It came to me not working and with a broken piece of mazac in the trigger. I tinkered with it. Awful trigger set up and piston/cylinder. Luckily someone on here needed the side castings do I posted the gun onto them. since been told the same bit was broken on his pistol
The Daisy 717 came as a freebie. Lawrie managed to get the valve to seal and after a couple of weeks this got passed onto the postman with a tin of pellets.
Anyone else got views or horror stories of these things?
To listen is a sign of indifference to one's hearers.
I have to agree, Guy. Over the years many of these have passed through my workshop. The Panthers, RO72's and Rekord models ... all total crap to an engineer.
I suppose they did serve a purpose as many of them were sold, but there must have been an awful lot of dissapointed kids when their airguns finally broke and were found to be un repairable.
I would also include the G10 in that bunch , and mmuch higher up the chain ..... Relums ......total crap , and yes I have read the ' carbining a tornado' thread .... You can't polish a turd. !
New year , new policy .. no more being nice , tell it like it is.
Oh dear what have you started ?
Remember, `LIFE IS NOT A REHEARSAL`.
Ha ha ha!!
Have to agree Guy, they're not wirth wasting the time on!!
My dad was a hauliage driver and used to go to the MOD, He came home for dinner one day and his lorry was sheeted over (Unusual that), he told me that he had a load of machine guns on the back going for melting down and that he'd put me a gun in the cab!!
Jeez!- I ran to the lorry like Billy Whizz (anyone remember him?? ), I was a tad disappointed when I found.......... A cra**y Milbro G10 with no innards (only marginally worse than one complete!!!)...
The gats and those rubbish Italian things- best avoided!!!
for my gunz guitarz and bonzai, see here
RO72 and Panther Artillery carbines, I have three or four boxed in as new condition, loved mine back in the early eighties so bought them for nostalgic reasons
Utter crap to be honest, but seeing them at the back of my gun room and the occasional fondle (oo er) takes me right back to great childhood days.
Occasionally I fire one and it ruins the memory
I woouldn't have put a 717 in the same class as those other horrors myself.
Happy New Year Guy!
The RO guns were awful shite. And the plastic and alloy Crosman pumpers were indeed disposable - still are at a few dollars a throw.
Look at this thread where I argue against the Crosman 761XL - people love these flimsy pot-metal things!
A BSA Meteor can blow it out of the water and outlive generations of 760/761/766s!
I agree with Jerry though, the Daisy Powerline pistol is better than the others and shoots well too. Worth fixing up if you find a leaky one.
Poor quality indeed, but to a young lad in the 70s these were the things that dreams were made of, and got us into shooting.
I like the RO71 and RO72 for nostalgia, and have a few.
They are part of airgunning history, and heritage, and need preserving all the same.
I had a Skiff pistol blow up in my hand. The bugger had a fresh co2 in it, and the crappy cast / monkey metal firing valve split in two.
Luckily the slide rails took most of the force, as it blew the slide off
::mutters like Mutley::
Rapid 17 MK2 Special "Village People" Edition
I still have my Manuarm, my first ever airgun and to be fair it has taken in its stride all the abuse a fourteen year old boy with a penchant for experimental ballistics could dish out!
Not bad for £20. I think a Gat in the basic box without all the corks and darts was about £8 at the same shop.
Anyone know the dimensions of the standard mainspring might be, and what other gun's springs might be equivalent? Mine got replaced by the gunsmith after the original broke but he used a thinner wire spring as he couldn't get a proper spare.
If that link does not work I suppose someone else will put it up. The point trying to make here is that heard of quite a few of the 717's having the holes stretched in the castings because somebody has wound the piston up (or maybe it's done it it'self?). Yes ---I know Webley Hawks etc can have the cylinder pin holes stretched because some chimp has fitted a monster spring.
I reckon if you tried to buy a set of the Daisy frames from somebody over here that it would cost more than the 2nd hand price of the gun?
To listen is a sign of indifference to one's hearers.
I had a Daisy 717 for a while, nice fun gun, sadly I was forced to sell it so have no idea what they're like long term.
The only die-cast guns I own now are a Record Jumob and a Record Champion, which are both actually ok. There are two main faults with them, the metal gets brittle where it's stressed (the piston and breech are on the Jumbo for instance), and the alloy tends to corrode where it's in contact with steel parts, the screws that hold it together for instance. A reaction gets going where the alloy and steel touches which causes the alloy to turn into a white powder, threads in the threaded holes that the screws reside in can be corroded to nothing over a few years. Sadly I have seen a couple of Jumbos like this over the years. When I rebuilt my last Jumbo I was careful to apply a thread-sealing compound to the screws before refitting, and also keep it well-oiled and greased, which helps.
Some die-cast guns like the Record Jumbo and Champion are good fun and have unusual design quirks, it is the design endears them to me, the build quality is pretty good on the whole and, as long as you take care to stop the corrosion as mentioned above, and don't give them extra stress by firing them without pellets, they should last reasonably well. The steel parts are good, some of the alloy parts such as the piston have steel inserts where they are vulverable to wear, and the barrels are good on these too, with good but shallow rifling to make them as efficient as possible.