Results 1 to 12 of 12

Thread: Pelicase inserts reconfiguring

  1. #1
    Join Date
    Nov 2003
    Location
    Kingsbridge, Devon
    Posts
    1,082

    Pelicase inserts reconfiguring

    Hoping that someone here can give me some useful advice.
    I've got a very nice Pelicase 1500 which has been messed about with internally in the past - looks like a gorilla configured the insert to fit a very nice Titan pistol..... I say fit in the loosest sense of the word!
    I still have most of the chunks of foam that were removed in order to fit the pistol.
    What I'd like to know is whether there's a way of putting foam back in order to make things a better fit?
    At the moment I can only think of that spray on upholstery adhesive that you spray on both parts and wait for it to go tacky before fitting together, but I can see that winding up in a hell of a mess!
    Any advice appreciated.
    Cheers

  2. #2
    Join Date
    Dec 2005
    Location
    Liverpool
    Posts
    265
    Why not see if you can just replace at a decent price? Foam should not be that expensive and would give a nicer result than gluing together butchered chunks.
    http://www.anyfoam.co.uk/

  3. #3
    Join Date
    Nov 2003
    Location
    Kingsbridge, Devon
    Posts
    1,082
    Thanks for that - excellent idea. Had no idea that company existed.
    Any thoughts on best way of accurately cutting foam?

  4. #4
    Join Date
    Aug 2005
    Location
    W-s-M, Somerset
    Posts
    2,565
    Quote Originally Posted by Dijon View Post
    ...
    Any thoughts on best way of accurately cutting foam?
    Electric carving knife

    Doug
    ... 'My Good Deals' - see >here<, post #538
    BASC
    >visit their website< & find out how to join

  5. #5
    Join Date
    May 2012
    Location
    Frosterley
    Posts
    3
    Hi...

    Pick'nPluck foam from http://www.efoam.co.uk/pickpluck.html

    Only trouble is you've got to buy a lot of it. I use it in my camera cases.

    Cheers

    Malc

  6. #6
    Charlts is offline I'm not the Messiah, I'm King of the Creedbros!
    Join Date
    Feb 2007
    Location
    Leicester, Wigston, 171.27 miles North of Calais!
    Posts
    13,182
    Quote Originally Posted by Dijon View Post
    Thanks for that - excellent idea. Had no idea that company existed.
    Any thoughts on best way of accurately cutting foam?
    I use a bread knife for mine, anything with a serrated edge.
    The toxicity of lead varies, depending upon the weight of its doseage and its velocity!

  7. #7
    Join Date
    Feb 2012
    Location
    Carmarthen
    Posts
    1,244
    Cheap plastic knifes from pound shop with the retractable blades that extend enough to cut all the way through the foam

    Evil Bay item 221171545196 sell four for a pound in my local pound shop

  8. #8
    Join Date
    Jun 2020
    Location
    Southend
    Posts
    1
    I bought a sheet of packing foam (the hlb stuff) and found that works really well for making your own inserts. Have heard that kaizen foam cuts well also.

  9. #9
    Join Date
    Aug 2007
    Location
    Southampton
    Posts
    99
    You can get replacement pick and pluck foam from Peli UK.
    https://peliproducts.co.uk/1500-pick-n-pluck-foam
    Yes, I know its an old thread, but its also available for other cases.

  10. #10
    Join Date
    Jul 2007
    Location
    swinton, manchester
    Posts
    458
    Quote Originally Posted by Dijon View Post
    Hoping that someone here can give me some useful advice.
    I've got a very nice Pelicase 1500 which has been messed about with internally in the past - looks like a gorilla configured the insert to fit a very nice Titan pistol..... I say fit in the loosest sense of the word!
    I still have most of the chunks of foam that were removed in order to fit the pistol.
    What I'd like to know is whether there's a way of putting foam back in order to make things a better fit?
    At the moment I can only think of that spray on upholstery adhesive that you spray on both parts and wait for it to go tacky before fitting together, but I can see that winding up in a hell of a mess!
    Any advice appreciated.
    Cheers
    when I did this in one of mine I used a hot glue gun, worked pretty well. Saved the expense of replacing the pick 'n' pluck as it's not cheap

  11. #11
    Join Date
    Aug 2020
    Location
    Banff
    Posts
    37

    Thumbs up Pelicase inserts reconfiguring

    Quote Originally Posted by termin8R View Post
    Electric carving knife

    Doug
    - seriously dose an electric knife work okay ? ( have got one buried away somewhere - i'll have to give it a try.. )
    - cheers, Les.

  12. #12
    Join Date
    Nov 2010
    Location
    sunderland
    Posts
    298

    reconfiguring foam inserts

    Hi you can get an electric foam cutter that does a fantastic job very cheaply off the bay of e .

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •