Results 1 to 11 of 11

Thread: Webley Stingray

Hybrid View

Previous Post Previous Post   Next Post Next Post
  1. #1
    getpip Guest

    Webley Stingray

    Hi... I have a Webley Stingray which although about 18 months old has only fired one tin of pellets... i dont use it cos its not that much fun to use.... it feels really clunky and harsh.
    Now I know its never going to be a Theoben but can anyone suggest a reasonably priced way of getting it tuned or breathed on so I am more inclined to take it out.
    Thank you all.

  2. #2
    itsa344 Guest
    A proper strip and re lube should help matters no end ~ they come from the factory over lubed IMHO.

    Failing that, Webley venom do a nice DIY kit that I can recommend.

    A reasonable gunsmith should be able to sort out either of the above fairly cheaply.

  3. #3
    Join Date
    Jan 2004
    Location
    On ma dirt farm near Dudley in the Westmidlands.
    Posts
    13,128
    SFS will sort it out/tune ect for 45 quid.

  4. #4
    Join Date
    Jul 2000
    Location
    Derby
    Posts
    6,499
    I would have a go at servicing it yourself, clean all the old lube off, spray the spring liberally with motorcycle chain wax (aerosol), leave it for the solvents to evaporate, rub the inside and outside of the piston with Moly GN paste, rub the inside of the cylinder with same, apply some moly grease to the ends of the spring, reassemble, all should be well... Moly GN paste is excellent stuff, you rub it into the surface of the metal as if you were polishing it. It's longer lasting than grease and less prone to cause deiselling. Motorbike chain wax is excellent at dampening spring noise, some guns like a smidgin of moly grease added on top of the chain wax. Webleys sometimes have a plastic spring guide/vibration dampener, it's very rare but I have heard of one case where that had broke, also, after prolonged use, these can wear and the rifle will benefit from a replacement when it's serviced.

    I seem to remember hearing that Webley guns are usually just oiled at the factory, that was certainly the case with my Tempest. A bit of cleaning, then a modern lube job, with wax, grease, and paste worked wonders on that pistol... I did the trigger with GN Paste as well which improved that too!

    Rob M

  5. #5
    getpip Guest
    thanx for the advice people...

    Big Dave... who are SFS?

    Rob M.... i am no gunsmith but am mechanically competent... can i handle this myself and do i need special tools?

  6. #6
    Join Date
    Jan 2004
    Location
    On ma dirt farm near Dudley in the Westmidlands.
    Posts
    13,128
    Quote Originally Posted by getpip
    thanx for the advice people...

    Big Dave... who are SFS?

    Rob M.... i am no gunsmith but am mechanically competent... can i handle this myself and do i need special tools?
    Sandwell Field Sports.

    Have a look see at www.sandwellfieldsports.co.uk

Similar Threads

  1. webley stingray
    By Daniel Emsley in forum General Airgun.
    Replies: 10
    Last Post: 07-09-2006, 08:51 PM
  2. Webley Stingray Question
    By rajstuff109 in forum General Airgun.
    Replies: 0
    Last Post: 25-02-2006, 05:19 PM
  3. webley stingray 177
    By napia in forum General Airgun.
    Replies: 2
    Last Post: 05-06-2005, 02:08 PM
  4. Webley Stingray
    By dawn raider24 in forum General Airgun.
    Replies: 10
    Last Post: 21-04-2004, 07:47 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •