Have a word with Harry and Sue Preston, they have the spacers which you use as well as the 232bar adaptor in a 300 fitting, it works a treat and saves having 2 adaptors
Hi
Could someone advise - using a 300 bar tank to fill a Steyr clyinder , I believe I will need a non standard adaptor, Are there any other problems with this ?
tia
Evo 10 Compact.
Have a word with Harry and Sue Preston, they have the spacers which you use as well as the 232bar adaptor in a 300 fitting, it works a treat and saves having 2 adaptors
Excellent , thanks for that.Shooter560
Have a word with Harry and Sue Preston, they have the spacers which you use as well as the 232bar adaptor in a 300 fitting, it works a treat and saves having 2 adaptors
Evo 10 Compact.
Hi,
Yep - this is the bit you need.
I've got one semi- permanently fitted to my 300Bar bottle - works with all the myriad of adaptors that the various manuafacturers insist on making (including the for the Steyr)
http://www./itm/Scuba-Adapter-for-Co...item3a7e01cd70
Cheers,
Drew
Best fittings make a 300bar Steyr adaptor
Steyr LG110 Hunter,AA410 in Gary Cane stock,HC, Steyr LP50,Morini 164ei,Morini CM84e,Anschutz 1417 thumbhole,Rimfire Magic 10/22,Anschutz 1913,Rieder and Lenz Z2,Keppeler 6mmbr
Hi not sure if this is what you are after it was used for filling my feinwerkbau 500 cylinder from my 300 bar cylinder and is now for sale here's the link 5th item down
http://www.airgunbbs.com/showthread....loves-for-sale
Thanks guys for your replies, Drew, the link does not work. (TC I'm not sure if that will work with the Steyr.)
Cheers
Dave
Evo 10 Compact.
Best Fittings also do a spacer that allows a 232 bar fitting to be used in a 300 bar filler.
It's also around £4.50,so the cheaper option, and it can also be used with any other 232 fitting you have, so saves you buying a new one of each.
Kind regards,
Phil
I now have so many airguns I've had to make a list, which is >>HERE<<
>>Classic Air Pistol Association<<
>>North Manchester Target Club<<
Hello
I just put two big tap washers beneath the 200 bar fitting to fill the gap. It works fine, and cost about £1. I am obviously mindful not to overfill the Steyr Cylinders.
It may not be the 'ideal' scenario, but it works and its cheap.
Alternatively search 'steyr fitting' on , their is a company who produce elongated fittings..... or speak to Harry P!
-Nick-
After viewing this thread I bought the spacer from BEST fittings £4.50 + postage works fine just need to watch the guage.
Regards, Phil
I could not find the spacer on Best Fittings site so I bought the adapter (17.50 incl post.)
Evo 10 Compact.
For info, a link to the spacer is >here<
Kind regards,
Phil
I now have so many airguns I've had to make a list, which is >>HERE<<
>>Classic Air Pistol Association<<
>>North Manchester Target Club<<