FW 55 trigger/mag feed problem

[johnd]

I have been asked to try to sort out this problem by the pistol's owner. It seems that several persons have already made efforts to repair it, without success. If anyone out there has info on number of threads showing on any of the trigger adjustment screws of a FW55p in working order, It would at least give me a datum to begin from. If nothing is available I foresee many hours of trial and error looming. Thanks in advance.

[Vic Thompson]

I'm not sure if I've got the right id, but are you referring to a Feinwerkbau pistol ? If so info is available here : http://www.feinwerkbau.de/en/Service...-product-range

HTH, Vic T

[johnd]

Vic, Thanks for your input. I have what is on the FW site regarding this pistol. My problem is finding where to set at least one of the screws, So that the pistol cocks. Once I have that the rest is pure trial and error. The maker says don't adjust screw 4. From looking at it, it is apparent that it has been moved more than once. I'll just get on with the job till I get some result.

[Vic Thompson]

The instructions for basic set up and adjustment of screw 4 are contained in the C55P manual on page 18. Did that not help ? A bit more info, most likely duplicating the info in the manual is contained here : http://www.pilkguns.com/tenp/spfwbc55p.htm

If all else fals, Ian Shirra-Gibb : http://www.centra-uk.co.uk/centra.html should be able to help.

Vic T

[johnd]

Vic T, Thanks for your input. I have both docs and will be doing a bit more trial and error for now. Regards Johnd.