Quote Originally Posted by bigtoe01 View Post
capillary action works best under vacuum...the loctite seeks out holes etc.

a modification to the method would be create a vacuum for 30 mins, release the piston, withdraw the TP plug, withdraw the piston, replace the TP plug but this time from the inside of the action, then push the piston back in to pressurise the cylinder.


I have done one 35 this way and 2 35's with just vacuum , and all 3 had the issue cured
I am quite sure you got the results you were after but how can you maintain any vacuum by withdrawing the piston if the breech weld is porous? Sorry for my pedantry