Results 1 to 15 of 37

Thread: wad size

Hybrid View

Previous Post Previous Post   Next Post Next Post
  1. #1
    Join Date
    Sep 2011
    Location
    nr burnley ,lancashire
    Posts
    1,643
    Boots E45 is the stuff.
    e45 cream £6.99 from boots for there 350g tub
    ballkeeper

  2. #2
    Join Date
    Sep 2011
    Location
    nr burnley ,lancashire
    Posts
    1,643
    Never had this before so think i may try the E45 myself. I take it
    we just fill the end of the chamber on top of the ball.??? Tim
    yup thats it tim
    ballkeeper

  3. #3
    Join Date
    Jan 2008
    Location
    grantham
    Posts
    1,507
    Got a tub so will give it a go. Tim

  4. #4
    Join Date
    Feb 2008
    Location
    Huntingdon
    Posts
    9,253
    Great thing about E45 is that it's an emulsion and just washes away, taking all the glep with it.

    AND it's good for your hands, too.

    tac

  5. #5
    Join Date
    Aug 2009
    Location
    Exeter
    Posts
    74
    I use 3mm cork wads,over powder so water based not good.
    Snug fit, lube in a bag with some wonder lube,warmed up so it soaks in.
    can't use semilina indoors.

  6. #6
    Join Date
    Sep 2011
    Location
    nr burnley ,lancashire
    Posts
    1,643
    ostcat
    I use 3mm cork wads,over powder so water based not good.
    Snug fit, lube in a bag with some wonder lube,warmed up so it soaks in.
    can't use semilina indoors.
    how much black power or sub do you use,
    ballkeeper

  7. #7
    Join Date
    Jun 2005
    Location
    leeds, west yorkshire
    Posts
    12,967
    I now use just cast bullets with no lube in the grooves and then dipped in udderley smooth....no leading and easy cleaning
    Edit......bugger didn't read thread
    My recipe above is for martini Henry rifle

  8. #8
    Join Date
    Aug 2009
    Location
    Exeter
    Posts
    74
    Quote Originally Posted by gtpkeeper View Post
    how much black power or sub do you use,
    I buy sheets of compressed 3mm thick cork,a few ft square at a time,does a few thousand for £5.
    I made the cutter but a bought one should do the same.
    In a drill press set so it doesn't quite go all the way through.cut about 15 then pop them out.
    take mabe 5 mins to do 100.
    around 20 grns equivalant by volume 777 (13.5 ish grns by weight) with one wad in an old uberti NMA.
    That was measured though to give 2mm compression with the lever to the stop so that would be the minimum charge,

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •