Use of Danish Oil for Stock Finishing

[nige346]

Not sure whats in Tru-Oil but I've never had a problem with scratches, I do think some people put it on way to thick though almost painting the gun with it, I normally just put some on a rag and rub into the wood, The sheen conditioner (or for a glossy finish wax) provide's a protective coat, I have used this method for both hunting and target rifles without any issues and very good results, Warming the wood "gently" does help as it opens the grain allowing the oil to penetrate, What is however important is removing the old finish before attempting to apply anything, this is normally do with wire wool and denatured alcohol, the more time spent prepping the better and more durable the finish will be.

[richardscar]

dont forget ballistol

someone mentioned it in a previous thread ...so i got some
soaks into the wood , enhances the grain, protects and is not "varnishy" at all . apply it, put gun back in bag . nest time you get it out no stickyness or shine just better colour and detail ....
job done

[valboskie]

Another option you may consider is ccl conditioning oil
I was recommended that by Geordie the stock maker for my ginb stock
And it came out brilliant.
Just apply thin layer and leave it for 30 to 45 minutes then work in the oil with the heel of your hand till friction heats it up then wipe of any excess don't buff just a gentle wipe.
Don't be in a rush just do one coat a night till you get your desired finish.


I hope this is of some help to you.

http://i833.photobucket.com/albums/z...ps11e06e67.jpg

[nat1]

Most Danish oil is tung oil based., so it is a proper oil! it will of course have hardeners and resins in the mix and give a satin finish, a semi gloss can be achieved with more coats and plenty of burnishing/polishing.

Every thing i've made in my signature has Danish oil on,including these two fiddle-back maple stocks=





I've also had good results with boiled linseed and pure tung oil,use what ever you prefer.
Atb Woody.