I paid £23 for the roll crimper. Cordless drill is in my garage!
I paid £23 for the roll crimper. Cordless drill is in my garage!
Lee 1oz Slug Mould about £20 (you can go for Lee 7/8oz mould, round ball, or 2 types of Lyman slug mould)
2nd hand Lee Loadall 2 £30
Stainless ladle from Wilkinsons £2.50
Couple of Stanless Balti dishes to melt the lead in £4.00
Lee ingot mould £10.00 or you can just use a brick with an indent in it (I prefer to cast ingots as I've already fluxed most of the crud out of the lead then)
Camping stove, already in the garage
2nd Hand Roll crimp £15 (but lee slugs can be star crimped with the loadall 2)
Wads,hulls, frangible disks (if reqd),primers & Powder at whatever price you can get them for (can re use hulls from your own stash or from your local clay ground)
You may find you already have some old stuff knocking about you can use.
I am quite certain that the argument you've already won in your head was entirely more satisfying to you than the one that is actually occurring.
Member of WR&PC,BASC & UBC
vectan A1 should so light 12gauge slug
A1
12 FORTE POLVERE GR. 1,80 PALLA "GUALBO"
Good deal, Paramainiac 20-05-07
Good deal, Snipperuk 11-09-10
Good deal, Skygrowler 13-10-10
that powder load looks low to me all the data I have they use more powder
I will check and get back to you
thats 1.8 grams....
the data i posted was from gualandi.
vectan A1.
Good deal, Paramainiac 20-05-07
Good deal, Snipperuk 11-09-10
Good deal, Skygrowler 13-10-10
1.80g is not low, still burns clean with 1.60g in fact. Probably less but I didn't bother trying.