Brass case Annealing Machine

[bullbarrel]

See if this damn fine chap can give you a lead on where to get one or just use his service.

[1 mill]

I tried to buy and ship the Giraud to the uk but federal laws will not allow the sale of automated reloading machines to outside the USA .
I did buy the bench source and had it shipped over without any problems I am very happy with it .its a very well made machine that's easy to set up and use .
There is a chap that makes the auto powder trickle who does make a machine but as one offs he contacted me after I did a similar post

[bulls_hitter]

I though about buying a machine until I saw the price so I made this
http://youtu.be/z0TlctbLT3w
I am not an engineer and most parts came from the bay
I could take a few photos of the works if anyone is interested
Steve

[SandyB]

I though about buying a machine until I saw the price so I made this
http://youtu.be/z0TlctbLT3w
I am not an engineer and most parts came from the bay
I could take a few photos of the works if anyone is interested
Steve

Absolutely AWESOME! I can imagine with the right partner you could be on to a winner with that. I can imagine a few BBS members requesting orders from you.... me FIRST

[dannywayoflife]

I'd buy one!

[Elwood]

Steve, awesome job.

I already have a Benchsource but if you ever decided to make a few of these I would be interested, price dependent of course

[Furrybean]

I though about buying a machine until I saw the price so I made this
http://youtu.be/z0TlctbLT3w
I am not an engineer and most parts came from the bay
I could take a few photos of the works if anyone is interested
Steve

Steve, if that is your machine hats off to you. Its the best design Ive seen and Im getting the bits together to make one.
What is the push pull solenoid you have used? I got one but it was a little limp wristed!

[bulls_hitter]

The push solenoid in a central locking solenoid from maplins I think it was less than a tenner I used the linkage rod that came with it and a small spring to return,as it was a little random with it's stop position.
The ferrel in the case I passed the rod through is a alluminium pot rivet if I recall a 5mm x 20mm of the type that does not leave the broken steel centre pin in.
Hope this is of help
Steve

[loiner1965]

I reckon you should take orders and build them lol

[dannywayoflife]

I reckon you should take orders and build them lol

Ditto!!

[fizzbangwhallop]

I reckon you should take orders and build them lol

Ditto too

fizz

[kindwarf]

I got a machine from a guy in Romania or Hungary for £180 brilliant machine found a box of Lapau 6.5 x 55 that shot hard a few years ago, annealed them loaded them for my F class rifle shot them a 300 to 1000yds at Bisley they performed great worth the money.

[weebeestie]

I got a machine from a guy in Romania or Hungary for £180 brilliant machine found a box of Lapau 6.5 x 55 that shot hard a few years ago, annealed them loaded them for my F class rifle shot them a 300 to 1000yds at Bisley they performed great worth the money.

Is this the bloke on UKV.

I'm not on that forum so would appreciate his contact details if possable.

[baldycoot]

You can find Lubo on facebook

https://www.facebook...ptorvarminting/

If you are reloading several calibres you may need more than one disk, which brings the cost up, but still worth it.

or if you want one built in the UK, where one disk does all calibres, try mick miller on pigeon watch.

[weebeestie]

baldycoot
You can find Lubo on facebook

https://www.facebook...ptorvarminting/

If you are reloading several calibres you may need more than one disk, which brings the cost up, but still worth it.

or if you want one built in the UK, where one disk does all calibres, try mick miller on pigeon watch.

I found and messaged him.
Thanks for the info.