Yes thanks again for the additional info.. I made a new extractor, and it works fine. It was not hard to do except for the very tight tolerances to be coppied from the bolt grouve. there is a slight lead in the grouve that tightens as the bolt is rotated. <that was the hardest to measure. the rest was just measure and make a few though oversize so i could file / polish it back to shape..
The front U shaped part of the extractor I made from a build up of sucessive welds and a lot of filing.. Weld is very hard and as the steel i chose was also a very high strenght It should last for ever...the bolt action is firm and positive with no binding and the spent casing ejecta like an auto when i pull back the bolt.. ok for the title boys gun... im still a boy at 61 years of age.. ha ha
Colin