Results 1 to 15 of 90

Thread: Stroke lengths, TP sizes and SCR for various springers...

Threaded View

Previous Post Previous Post   Next Post Next Post
  1. #1
    Join Date
    Jun 2011
    Location
    Hatfield Broad Oak, Essex/Herts CM22
    Posts
    3,967

    Stroke lengths, TP sizes and SCR for various springers...

    OK guys, with all this talk of SCR etc... How about we put a list together of the standard stroke lengths, bore sizes and TP sizes?

    I've got ones for a HW 77/97 and a 95 (HW80 + HW35 added) so far.... Would be interested to know them for the 99, 80, 55, TX/Prosport old and new, LGV etc....

    I'll need: Model - Bore size (B) - Stroke Length (S) - Transfer Port Diameter x Length (TP) - Piston weight in grams without the liner but with the seal.




    Standard rifles
    Model Bore D (mm) Stroke (mm) Swept Vol.(cc) TP D x L (mm) TP Vol. (cc) SCR Piston(g) Caliber Notes
    HW77/97 early 25 81 39.76 3x6 0.042 938:1 235 - up to serial number: 1446048 - Some rifles have 2.9, 3 or 3.1mm TP
    HW77/97 Late 26 81 43.01 3x6 0.042 1014:1 265 - From serial number 1446049 - Some rifles have 2.9, 3 or 3.1mm TP
    HW95 26 85 45.13 3x15 0.106 426:1 254 - -
    HW80 30 80 56.55 2.9x11 0.073 779:1 - - -
    HW35 Early 30 65 45.95 4x26 0.327 141:1 - - Leather seal (up
    to serial number 843636)
    HW35 Late 30 65 43.83 2.8x26 0.160 274:1 - - Synthetic seal (843637 on)
    TX200 (MK1+2) 25 84 41.23 3.65x9.8 0.103 403:1 a bit more than 225? - Additional Top Hat weight.... not sure of weights. Piston will weigh more due to longer piston rod.
    TX200 (MK3) 25 98 48.11 3.65x9.8 0.103 470:1 225 - .177 add 27g top hat, .22 add 16g for top hat
    Webley Vulcan 27 79 45.23 2.5x19 0.093 485:1 - - -
    Webley Hawke 25 79 38.78 4x16 0.201 193:1 - - -
    Westlake B2 25.4 80 40.54 4x28 0.352 116:1 - - -
    HW99S 26 71 37.7 3x17? 0.120 314:1 235 - 225 - 225g piston with seal and no liner. Add 10g if you leave the weight inside the piston.
    Modified Rifles below
    HW35LGV 25 71 34.85 4x6 0.075 463:1 - .177 Walther LGV Piston - Conversion by Mick (T 20)
    HW77/97 early 25 81 39.76 3.9x6 0.072 555:1 235 - TP opened up to 3.9 as suggested by Bigtoe01
    HW95 26 85 45.13 3.6x15 0.153 296:1 254 - TP opened up to 3.6 as suggested by Bigtoe01
    HW35 Early mod. 30 62 43.83 4x26 0.327 135:1 - - Synthetic seal convention (Chambers etc)
    model Bore stroke Swept Vol. TP dims 0.042 scr Piston Weight Caliber notes
    Last edited by brucegill; 10-01-2014 at 12:10 AM. Reason: Will update this post as new info comes in :)

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •