K22 Long Barrel Pistol from Caledonian Classic Arms- initial review plus Youtube vid

[Airbrush]

No issues, running fine.

Round count - about 2,000, mostly CCI standard with the odd box of Geco standard.

Thanks Paul, the reason I was asking is a mate knows of a few at his club who are having reliability problems.

I tend to get through a lot of ammo in a .22 semi auto fun gun & don't fancy spending nearly a £1k on a gun which is going to spit the dummy after a few thousand rounds.

[Hairydavey]

Once I ditched the 10 round magazines and bought the extended 19 rounders, my pistol has been very reliable with CCI standard and Minimags. I've put around 800 rounds (mostly Minimags) through mine so far.

I still point my finger at the 10 round magazines for my initial reliability problems, mine are gash and just live in the cupboard now. My 10 rounders have poorly moulded mag bodies which bow inwards and pinch the followers, recoil springs which were far too strong, and even with the insides of the mags sanded, the followers would still stick when feeding ammo. Had none of these issues with the extended ones (read also includes original 13 round mags as same body used for these and extended, 10 round mag bodies completely different.).

[Optomist]

Sounds like all are happy with these no one at our club has got one yet, I may be the first.
However the old question comes up with these have you got them on a standard .22 slot as a carbine following the recent case that indicated that Long barreled pistols were not defined in the legislation or are you all applying for a Long barrelled pistol slot on your FAC with all the restrictions on others using it that follows?
Regards Optomist

[Renegade Master]

I've just sent in my renewal forms and have requested a .22 Long Barrel Pistol.

[rimfire-rebel]

For Optomist..

I think you`d have a problem trying to convince plod that your k22 or IJ/GSG 1911`s coathanger was in fact a shoulder stock!!

RR

[Airbrush]

Just ordered a K22 Standard plus Whisper, with 2x20 round mag adapters. Hopefully be here in 6-8 weeks.

[Hairydavey]

Just ordered a K22 Standard plus Whisper, with 2x20 round mag adapters. Hopefully be here in 6-8 weeks.

Nice. Willl probably be less ammo fussy than the X Trim as your slide will be lighter than mine.

[rimfire-rebel]

BRILL!! ANOTHER LBP HITS THE RANGES!!

So Airbrush wots the difference betwixt the two, is it a trigger job?

ATB

RR

[Airbrush]

BRILL!! ANOTHER LBP HITS THE RANGES!!

So Airbrush wots the difference betwixt the two, is it a trigger job?

ATB

RR

Basically the plus just has all the go faster bits including the trigger, went for the standard as I prefer the look to the milled out slide.

[Airbrush]

Pick it up today & I must say first impressions are I'm very pleased with the build quality & it looks much better in real life.

Hopefully get to shoot it on tuesday evening.

[rimfire-rebel]

Pick it up today & I must say first impressions are I'm very pleased with the build quality & it looks much better in real life.

Hopefully get to shoot it on tuesday evening.

I bet you cant wait!!! How about some picces I would love to see them

BTW... I am in the throes of building a Forum dedicated purely to LBPs. PM me for more details.

RR

[Hairydavey]

Pick it up today & I must say first impressions are I'm very pleased with the build quality & it looks much better in real life.

Hopefully get to shoot it on tuesday evening.

Nice

Yours should be a bit more ammo tolerant than mine as you've gone for the lightweight slide. Bang a micro red dot on there too and you're in buisness You know you want to......

http://i978.photobucket.com/albums/a...ps54642276.jpg

Only mount that's readily available that isn't airsoft is the F.A.B. Usm rail (being F.A.B., it's cheap but heavier than it needs to be), which isn't a good fit. You'll have to either file the rails on the inside of the mount (the route I went), or whack the mount onto the frame rail which will reform the rail on the pistol.

This is due to the K22 rail being slightly out of spec and slightly larger than picatinny size.

Once mounted you can still use irons and the balance isn't too bad either. Plus it looks pretty sweet.

Get yourself some 13 or 19 round mags mate, better than the 10 rounders. They are getting hard to find unfortunately.

I'm experimenting with some stainless steel scouring pad (not brillo type but the coarser stuff that looks to be made up of flat twisted ribbon), packed into the moderator expansion chamber. As the actual bore itself won't come into contact with the packing there is no risk of bullet strike, and such material is commonly used in the U.S.. I'll post back once I've tested it out, as I'm hoping it could help moderator effectiveness by further slowing down the expanding gasses. As you probably know the whisper moderator doesn't have any baffles, so I'm theorizing that the packing will hopefully act in a similar manner to baffles. If it doesn't, it wouldn't cause any damage anyway and I'll just remove it if uneffective.

http://i978.photobucket.com/albums/a...ps80361e7b.jpg

[rimfire-rebel]

Hi Stuart

Do the rounds strip cleanly from the mags, it seems odd that BOTH mags have developed the same problem at the same time, a close up piccie of an empty mag and the same one with rounds in it might help us,

I would be very wary how you approach cleaning the mag shoulder, they are plakkie and it wont take much to make them a few thou oversize and the round will just pop out!

That said the mags are under a year old and if it were me I would just get them both replaced!!

ATB

http://lbp-forum.boards.net/

RR

[marlin444]

Well with all the positive feedback that members are posting I feel that I must give the K22 a GO. Having had a slot on my cert for over a year I have today ordered The K22, X Trim, Plus,Whisper . I have been told it will be at my local RFD (the sportsman Exeter ) tomorrow. Here we go again like a big kid on xmas eve. I will let you know how I get on with it Thanks Paul.

[marlin444]

Well with all the positive feedback that members are posting I feel that I must give the K22 a GO. Having had a slot on my cert for over a year I have today ordered The K22, X Trim, Plus,Whisper . I have been told it will be at my local RFD (the sportsman Exeter ) tomorrow. Here we go again like a big kid on xmas eve. I will let you know how I get on with it Thanks Paul.

Hi my K22 arrived today as promised very impressed it handles all the standard velocity ammo that i have put through it. Then i tried the sub sonic Winchesters that i had. The pistol did not consistently cycle these rounds firing 1 or 2 then not blowing all the way back to load the next round. has anybody that has the whisper version found a sub sonic round that works ok thanks in advance Paul.