Results 1 to 12 of 12

Thread: FAO: Mike H

  1. #1
    Join Date
    May 2003
    Location
    Prestatyn, North Wales
    Posts
    8,104

    FAO: Mike H

    Had a look at your stock today, wish I'd looked on Sunday as I'd have batted you about the head with it.

    Got the old Nitromors, wax stripper then paint stripper out and spent an hour on the butt end trying to shift the 129 coats of god knows what but gave up in the end after developing 17 blisters on my fingers, so I decided to take some drastic action and got the blow torch out. Sadly it didn't pan out as I'd have hoped; lookie here. Sorry m8.
    Rgds,
    Dave.
    SkyDrive, Pics, manuals & more.

  2. #2
    Lee G Guest
    Did you have the marshmellows to hand dave

  3. #3
    Join Date
    May 2003
    Location
    Prestatyn, North Wales
    Posts
    8,104
    No Lee, I wasn't quick enough. With all the shyte on the stock it went up rather quickly.
    Rgds,
    Dave.
    SkyDrive, Pics, manuals & more.

  4. #4
    Mike H Guest
    Quote Originally Posted by Davestate
    Had a look at your stock today, wish I'd looked on Sunday as I'd have batted you about the head with it.

    Got the old Nitromors, wax stripper then paint stripper out and spent an hour on the butt end trying to shift the 129 coats of god knows what but gave up in the end after developing 17 blisters on my fingers, so I decided to take some drastic action and got the blow torch out. Sadly it didn't pan out as I'd have hoped; lookie here. Sorry m8.
    Sod it, I was going to get a Pro Sport anyhow Never mind the Grouse is all mine
    Mike.

  5. #5
    Join Date
    May 2003
    Location
    Prestatyn, North Wales
    Posts
    8,104
    The Grouse??? I expect at least a case after all the hard work going into this.

    Seriously though, I didn't put a blow torch too it, the friction alone was enough to ignite all the crap on it.

    No, no, no, only joking...after 4 hrs of sanding I've finally got most of the crap off, another several hours should see it ready for oiling.
    Rgds,
    Dave.
    SkyDrive, Pics, manuals & more.

  6. #6
    Mike H Guest
    Quote Originally Posted by Davestate
    The Grouse??? I expect at least a case after all the hard work going into this.

    Seriously though, I didn't put a blow torch too it, the friction alone was enough to ignite all the crap on it.

    No, no, no, only joking...after 4 hrs of sanding I've finally got most of the crap off, another several hours should see it ready for oiling.
    Ssshhh ! I bought it off a member here who did the oiling
    Mike.

  7. #7
    Join Date
    May 2003
    Location
    Prestatyn, North Wales
    Posts
    8,104
    "member" being a polite word for dick then...
    Rgds,
    Dave.
    SkyDrive, Pics, manuals & more.

  8. #8
    Join Date
    Jun 2004
    Location
    Wittering
    Posts
    1,033
    I won't even rise to that excuse the pun

  9. #9
    Join Date
    May 2003
    Location
    Prestatyn, North Wales
    Posts
    8,104
    So your the "member" then Gaz?
    Rgds,
    Dave.
    SkyDrive, Pics, manuals & more.

  10. #10
    Mike H Guest
    POPCORN Sorry Dave I should have said. Sorry Gaz, it's really nice, just a bit sticky Please don't take it personally
    Mike.
    (I'm outta here !)

  11. #11
    Join Date
    Jun 2004
    Location
    Wittering
    Posts
    1,033
    the stickiness was a personal touch

    But for sure I won't be using that oil again!

  12. #12
    Mike H Guest
    Quote Originally Posted by gazd2002
    the stickiness was a personal touch
    Ewwwww ! DNA and all that manfat. Glad it's not me scraping it off
    Mike.

Similar Threads

  1. Mike H
    By long in forum General Airgun.
    Replies: 2
    Last Post: 23-12-2005, 05:19 PM
  2. fao mike h
    By vinny in forum General Airgun.
    Replies: 2
    Last Post: 11-07-2005, 05:08 PM
  3. Does anyone know Mike Fahey?
    By John Wilkinson in forum General Airgun.
    Replies: 0
    Last Post: 16-07-2003, 10:36 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •