Hi All - I have just been gifted the above rifle see link to pics.
http://s618.photobucket.com/user/bad...a%20Model%2027
Initial findings are basically sound but needs good clean up and lube which I shall do using the excellent "tuning the older springer" guide on here.
Its full of oil I think ! 10 shot string:
hi 631 lo 566 av 605 sd 20
I will strip and Danish Oil the stock.
Appears to need the following:
Rear sight
Stock screws
Breach seal
And what I shall refer to as the lower (beneath the transfer port) barrel alignment catch.
Do you think I could get all these parts at Chambers ?
Do you think its possible to get a scope rail to fit it ?
Any hints / tips from you experienced chaps ?
Many thanks
Steve