let me know when you find something !
This is the hardest part of the puzzle at the moment
I think protec changed their specs, now advertised 19mm
I am in need of a mainspring, with 18mm od the only thing that looks like it might work is one for a Norica Dragon, but I cant find anywhere that has them other than a place in portugal , any Ideas .
let me know when you find something !
This is the hardest part of the puzzle at the moment
I think protec changed their specs, now advertised 19mm
Always looking for any cheap, interesting, knackered "project" guns. Thanks, JB.
I'm guessing you already know all of this, but just incase
There's an 18mm on here.....says to fit heavy gem rifles??
Spring
http://www.proteksupplies.co.uk/mainsprings.html
16mm here and 14mm
http://www.airgunspares.com/store/category/64/854/GEM/
This link was on this forum,
http://www.assocspring.co.uk
Chambers norica dragon Spring Chambers have a sale section but they've no 18's
https://www.gunspares.co.uk/products/24978/Dragon/
No 11 is 18.8
http://bagnallandkirkwood.co.uk/prod...un-mainsprings
Nick ,
Give us the dims
I'll cost up getting one wound .
Thanks for the above , I have a NO11 in at the moment, and its a little close for comfort once compressed , I have a long stroke so the expansion is quite significant , it shoots nicely but the last bit off the cocking stroke is naff, and it wont do anything for the consistency either .
22mm project, Nick?
THE BOINGER BASH AT QUIGLEY HOLLOW. MAKING GREAT MEMORIES SINCE 15th JUNE, 2013.
NEXT EVENT :- May 2025.........BOING!!
Oooooo, lovely.
Will you be bringing it to the Bash?
THE BOINGER BASH AT QUIGLEY HOLLOW. MAKING GREAT MEMORIES SINCE 15th JUNE, 2013.
NEXT EVENT :- May 2025.........BOING!!
most definitely loki wants to test it in its final state.
Thought I'd post these, incase anyone's looking
https://www.gunspares.co.uk/products...pecial-Offers/
MS103
Kasu square section spring. 34 coils, 20.7mm i/d, 14.5mm i/d, 3.3mm coil section, 265mm overall length. Stock clearance.
Price: £5.50
MS104
Kasu square section spring. 31 Coils, 20.55mm o/d, 13.7mm i/d 3.25mm coil section, 235mm long. Stock clearance.
Price: £5.50
MS105
Kasu square section spring. 31 Coils, 23.4mm o/d, 16mm i/d, 3.5mm coil section, 260mm long. Stock clearance.
Price: £5.50
MS107
Low power german made spring for HW77/97. 28 Coils, 20.45mm o/d, 14.35mm i/d, length 235mm.
Price: £5.50
MS108
Round section main spring, 38 coils, 19.5mm o/d, 13.15mm i/d, 3.25 coil section, length 355mm.
Price: £5.50
MS109
Round wirre main spring 32 coils, 20mm o/d, 14mm i/d, 3mm coil section, 255mm length.
Price: £5.50
MS110
round section main spring 27 coils, 18.4mm o/d, 12.9mm i/d, 3.2mm coil section, 210mm length.
Price: £5.50
MS111
Round section main spring 30 coils, 20.5mm o/d, 14.2mm i/d, 3.15 coil section, 250mm length, chrome vandium.
Price: £5.50
MS112
Round section main spring 32 coils, 18.3mm o/d, 12.18mm i/d, 3.0mm coil section, 240mm length.
Price: £5.50
Thanks for that Andy, great prices.
I ordered one each of all of the round section ones.. some interesting sizes, always good to have when restoring older guns
Also old style Mk2 TX steel spring guides for £5.50 too
Always looking for any cheap, interesting, knackered "project" guns. Thanks, JB.
I have one here that I've written Original M5 on it that must have come from chambers.
It's 18.2mm outer and 13mm inner and 230mm long and 30 coils.
If you want it send me a pm.