Bam 40

[venoman]

The B40 is a very good rifle ,they did have alot of side to side play in the cocking leaver but this is not difficult to rectify. I know that the TX piston and trigger unit will fit, i think it was to close a copy of the TX and this is why its no longer for sale in the UK.The B41 is no way as good , the finish is not as good its very rough to cock. The 41 is fitted with the same trigger unit as the later XS20 model this is not the HW copy as fitted to the early XS20s, but a new unit that is one of the worst triggers fitted to any air gun or even a toy cap gun.

[gunsnlandies]

I seem to have got the one that is the exception to the rule Lyn. Mine is smooth to cock. There is no grating or scraping at all. It's a pity some of the mighty Weihrauch's weren't this good when new. You only hear the swishing of the piston going backwards plus the clicking of bear trap and sear engagement. There is also zero sideways movement in the cocking arm.
I stripped it down after half a tin of pellets. There were no rubbing marks anywhere. One end of the spring had been cut mid coil, but luckily the jagged end pointed towards the coils and not the guide. This was collapsed and ground flat. The other end was good to start with. It needed doing any way as it was over powered. Even the slots were finished well, with no sharp edges or burrs.
I agree with the trigger and this did take trial and error to get adjusted.
Unfortunately I was no better than the other knockers of this model. I accepted what I read as gospel. By taking the risk and buying one eventually, I actually ended up with something that is nice to shoot, smooth in operation, accurate and bang on the power level. Externally it is finished well with smooth steel and good blueing. The only real bad point IMO is the plastic cocking lever retainer/release button. But I can live with that.
I know it's never going to be a TX, but it wasn't the best part of 500 quid neither. So credit where credit is due.
People slag off the comics for biased reviews saying how wonderful everything they test is, when we know they're not. At times maybe we shouldn't believe everything we read on forums telling us how rubbish things are.

[pneucomer]

Hi gents
Thanks for your input. Will keep me eyes out for one. As some says if it is good it could be very good or it's bad it could be very bad but I would settle for some where in between.

[Gwylan]

Why should AA do all the R&D, set up the tooling, and produce one of the best springers of all time, only to be ripped off by some cheap Chinese copy? the same thing happened to HW.

Gus

[gunsnlandies]

I absolutely agree. But on the other hand, the sliding breach used on TX's and HW77 & 99's came from the Chinese Arrow type underleavers in the first place. At least with the 41 only some of the parts are copies. Much as AA took the design cue from the Chinese in the first place

[FattMann]

I absolutely agree. But on the other hand, the sliding breach used on TX's and HW77 & 99's came from the Chinese Arrow type underleavers in the first place. At least with the 41 only some of the parts are copies. Much as AA took the design cue from the Chinese in the first place

100 % on that, I bought My Bam 40 from you Venoman, and its a cracker, especially in its LP Custum stock and Bushnell scope. Agree allso the 41 is in many ways not has good in quallity or I would have had one in .177 by now. Has to the comment that the chianese ripped of Air Arms, didnt Air Arms base much of the TX on the market leader of the time the HW77. I dont see that has an insult myself, has each succesful rifle / car/ product, is simply an improvement/ refinement on the previous best. All underleavers after all have Lincoln- Jeffries/ Bsa somewhere in the pedagrie and long may it continue. The present best underleaver in my humble oppinion is the Walther LGU and thats an amalgum of TX and HW97 has to styling, i allready have the equally excellent Walther LGV , break barell, and the excellent HW97KT and can see another Walther joining soon, the new Terrius break barell.