cleaning lee melter

[gtpkeeper]

thanks guys ive tred that,think it needs wire brush on it or something,as still not clean up, might take the pot out,

[lostcat]

Can't see the need to remove all oxide from the pot after pouring out,it's going to form again when the pot heats up.
When it's all cooled down a few sheets of damp kitchen roll will wipe out back to the metal,so long as it's dry before switching on,any moisture should evaporate off before the next lead melts.
I use a 1/2" dowel of soft pine to stir down the sides and bottom,lower in slowly as any trapped humidity in wood will spit.