Results 1 to 15 of 39

Thread: Case lube

Hybrid View

Previous Post Previous Post   Next Post Next Post
  1. #1
    Join Date
    Dec 2008
    Location
    sunderland "north east"
    Posts
    6,431
    Quote Originally Posted by Simon_S View Post
    I use the Lee lube. its about £3 a tube. works ok
    Second that and it last's for donkeys

  2. #2
    Join Date
    Apr 2008
    Location
    Nuneaton
    Posts
    1,350
    Are you using the Lee lube on a pad and rolling?
    How are you lubing the inside of the neck?

    BBF
    "The grass is always greener on the other side"

  3. #3
    Join Date
    Nov 2008
    Location
    Whitstable , Kent
    Posts
    304
    Another Imperial user , it's Imperial

  4. #4
    Join Date
    Jan 2008
    Location
    Mold (Yr Wyddgrug) N.Wales
    Posts
    18,250
    imperial is the best i believe.....

    Lee lube or One Shot (predominantly) is what i use without any tears or disappointment to date
    Rapid 7 / 10-22 ATN 2 Stiller Predator .204 Pulsar N970 Tikka T3 semi custom ATN MARS thermal.204 Tikka T3 Semi.223 Wylde IOR Operator Lawton 6mmBR Kahles Gen 3 - Stiller 6.5 x 47 Bushnell BDX - Winchester Red Performance SX3 12g

  5. #5
    Join Date
    Nov 2010
    Location
    York
    Posts
    2,544
    Imperial end of

  6. #6
    Join Date
    Apr 2005
    Location
    Northampton
    Posts
    2,153

    Case lube

    A small quantity of STP on a foam pad.....keeps the cases nice and shiny. Not recommended for inside the neck.

    Mike95

  7. #7
    Join Date
    May 2010
    Location
    Rotherham
    Posts
    1,456
    I just put some on my fingers and coat the neck part. then ever 3rd case I put some the inside with cotton bud.
    You don't need a lot on though. You can use this and just reload the case with it on will not hurt anything. don't have to clean it off

  8. #8
    Join Date
    Dec 2008
    Location
    sunderland "north east"
    Posts
    6,431
    Quote Originally Posted by Blackbaronfish View Post
    Are you using the Lee lube on a pad and rolling?
    How are you lubing the inside of the neck?

    BBF
    I use a piece of cleaning cloth patch about 1-1/2" square with a small amount on good for around 10 15 case's

  9. #9
    Join Date
    Jun 2005
    Location
    Huddersfield
    Posts
    1,467

    lube

    I rub a nylon brush on to the lube pad so it picks up some lube put it in the chuck of a rechargeable drill and put it in the neck for a few seconds at slow speed.
    I love my country, but fear my government

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •