Baikal izh 46 m

[Fozzie3287]

Hello I have just bought a second hand baikal izh 46 m pistol which shoots really well I would like a spare set of breech seals for it but cant seem to find a stockist for them .i wondered iff any one knew of one .
Thanks fozzie 3287

[Benelli B76]

Good buy, these are amazingly accurate pistols. York Guns stock them, not sure if they keep spares.

http://www.yorkguns.com/Air-Guns-for-Sale

Baz

[Fozzie3287]

Good buy, these are amazingly accurate pistols. York Guns stock them, not sure if they keep spares.

http://www.yorkguns.com/Air-Guns-for-Sale

Baz

Hello Baz Thanks for your reply york guns don't have any on stock

[Fozzie3287]

Hello Baz thanks for your reply york guns don't have any in stock

[customstocker]

Hello Baz thanks for your reply york guns don't have any in stock

hi , what size are the seals ...inside diameter & outside diameter ? I may have something that will fit

[Benelli B76]

Have you tried the pistol over a chronograph ? if it is doing 430 to 450 fps with 7 grn pellets it does not need seals. Even 400 to 410 fps is acceptable as the model 46 puts this out. I am very busy at the moment, but when I get a chance will see if I can turn out a new compression piston seal from polyurethane as I have two original new seals with my 46 and 46 M pistols.


Baz

[gingernut]

You could try Checkmate Guns ,and City Air Weapons - Solihull

[I. J.]

IIRC one of our club members and BBS member (NOCITY) had a real problem sourcing a breech seal. In the end he picked one (?) up while has on holiday in the States. May be worth giving him a P.M.

ATB
Ian

[Fozzie3287]

Have you tried the pistol over a chronograph ? if it is doing 430 to 450 fps with 7 grn pellets it does not need seals. Even 400 to 410 fps is acceptable as the model 46 puts this out. I am very busy at the moment, but when I get a chance will see if I can turn out a new compression piston seal from polyurethane as I have two original new seals with my 46 and 46 M pistols.


Baz

Hello Baz the pistol shoots really good the reason I am after spare seals is that I have read on the reviews that they some times can fall out so I wouldn't like to be without a spare set

[Fozzie3287]

You could try Checkmate Guns ,and City Air Weapons - Solihull

Thanks for your reply I will give them both a ring

[Fozzie3287]

IIRC one of our club members and BBS member (NOCITY) had a real problem sourcing a breech seal. In the end he picked one (?) up while has on holiday in the States. May be worth giving him a P.M.

ATB
Ian

Thanks for your reply I have sent (nocity) a pm

[Benelli B76]

The two tiny seals in the breach and transfer port are flat and very simple. Smell like they are made from Ecorubber, but soft Shore hardness polyurethane would work well. Never heard of them coming out, but if you are worried why not put a tiny smear of silicone glue on the back so they are more secure.

Baz

[Fozzie3287]

Hello Baz I have had my pistol on a chrono and it is consistent in the limits you gave I will keep a check on the breech seals and hope that a supplier stocks them at some time .Thanks for your help Fozzie3287