Results 1 to 12 of 12

Thread: Webley mark 3 rifle spring and piston washer question

Hybrid View

Previous Post Previous Post   Next Post Next Post
  1. #1
    Join Date
    Jan 2003
    Location
    Ringwood
    Posts
    4,953
    Flatragectory, what springs would you recommend and Troubledshoter, thanks for the offer, I may well buy one from you. while I think of it, what lube do you guys recommend for the spring ?
    Remember, it is the strongest character that God gives the most challenges.

  2. #2
    Join Date
    Jun 2010
    Location
    TELFORD
    Posts
    2,101
    Quote Originally Posted by vbull View Post
    Flatragectory, what springs would you recommend and Troubledshoter, thanks for the offer, I may well buy one from you. while I think of it, what lube do you guys recommend for the spring ?
    I would recommend an original spec mainspring for this rifle. As for lube I use Millers red rubber grease or Castrol moly grease......sparingly.
    Pete.

  3. #3
    Join Date
    Jan 2003
    Location
    Ringwood
    Posts
    4,953
    I've bought an Abbey maintenance kit which recommends the included LT2 grease on the spring. Will this reduce the 'twang' or should I get what's been mentioned above ?
    Remember, it is the strongest character that God gives the most challenges.

  4. #4
    Join Date
    Jun 2010
    Location
    TELFORD
    Posts
    2,101
    Quote Originally Posted by vbull View Post
    I've bought an Abbey maintenance kit which recommends the included LT2 grease on the spring. Will this reduce the 'twang' or should I get what's been mentioned above ?
    Yes , the LT 2 is moly grease so fine, but just give it a light coating all over.
    Pete.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •