Air Arms: What were you using when you decided to put the "safety catch" in the trigger blade on the S400 series?
Air Arms: What were you using when you decided to put the "safety catch" in the trigger blade on the S400 series?
Why is the plastic case you supplied it in too small for the gun when you fit a scope?
Why does the magazine stop working at number 6?
Why do you say its got a raised cheekpiece when it has not? You would need a head like seabiscuit to use a scope with that.
Why have you chosen the female of the most obscure thread in the world for a silencer and then not even offer a silencer?
Why are you selling a gun for £1200 when you paid £8 for the barrel?
Why do you insist on putting regulators in your guns when you have not got one to work properly in the last 30 years?
Fighter against the "Dark Arts" A stranger in an even stranger land.
GC2+Leupold 14.4-34x45
AA400 fac receiver+sidewinder 8.5-34x52
Weihrauch HW77k fiddled with and doing what it wants to +Zeiss 3-9x36.
Weihrauch HW90k
Weihrauch HW97k learning from above,now sporting a Maccarri 77/97 target stock..+Bushnell 3200.Go on shoot one you know you want to
Daystate mk3 RT Delux + bushnell 4200 8-24x 40Does what it should again & again.
Fwb 124 + Optima was good is good!
Webley Vulcan.
Daystate,when are they going to take the drawings out and produce the 'springer' due some years ago? .
HERX77 .
Fighter against the "Dark Arts" A stranger in an even stranger land.
GC2+Leupold 14.4-34x45
AA400 fac receiver+sidewinder 8.5-34x52
Weihrauch HW77k fiddled with and doing what it wants to +Zeiss 3-9x36.
Weihrauch HW90k
Weihrauch HW97k learning from above,now sporting a Maccarri 77/97 target stock..+Bushnell 3200.Go on shoot one you know you want to
Daystate mk3 RT Delux + bushnell 4200 8-24x 40Does what it should again & again.
Fwb 124 + Optima was good is good!
Webley Vulcan.
Why do you make Stealths from Alloy - copper would have been better, as it is worth more when weighed in.
Herman, why did you use earwax to lube the hammer mech in a 100?
Q. Do airgun manufacturers read Airgunbbs, and if so, would they like to comment ?
Makers of the cheap, quirky, chinese guns - since when did shooters need 12" (that's 30cm to the enlightened) fingers to reach the trigger? And ssshhhhh dare I ask AA about AT?
Another Daystate question. The filler cap on the Airwolf, why not a screw in instead of the push on ?