Powder recommendations for 357 Mag

[mag44uk]

Forget bullseye. Too dirty and expensive.
Try Vectan AS.
You can get this from Folkestone Engineering.
Its a great powder in lots of pistol cartridges.
Its quite bulky so double charges are easy to spot and its CHEAP!
Plenty of top gallery rifle shooters using it.
Tony

[airgunnut]

4.1gr Unique with 158gr TC (gm hard cast) only shooting it on a 20m indoor range with a 475 foot pound limit, (its kicking out something like 250flb, whats the point of loading it up to nere the range limit and deafening every one when the paper target your trying to kill is only 20m away) 4.1 of Unique and a 158gr head gives a bit of a kick and a reasonably quite bang, quieter than the factory cowboy action loads. as a previous poster said, semi wadcutters don't load to well from underlevers

[parabellum]

Can you recommend a Vectan AS load for both 357 and 38 gallery rifle? Bullet is a GM hardcast 158 grain truncated cone.

[Simon_S]

There also one by the name of GM3 dirt cheap shotgun powder you can use its
about £40 per kg. Not used it my self but will be trying it next. just using my
tightgroup up

[mag44uk]

Can you recommend a Vectan AS load for both 357 and 38 gallery rifle? Bullet is a GM hardcast 158 grain truncated cone.

try 3.5 to 4.0 gn