Air Force One Trophy Pistol

[richierich]

For the guys that have one of these, What cases are you using with the CP1?

[Bjacobs571]

Just bought one from the website, very easy and straight forward. The only thing was even when I selected GB pounds it still showed 286 but the correct amount was shown on Paypal.

Now its just a waiting game

[richierich]

Well, i have it. Packaged well, and first impressions, very good. You want to know the funny thing?? Order it from poland, and the box/instructions are in ENGLISH!!

Well worth the £77 inc postage and taxes.

I have stripped it to do the trigger mod, and polish/grease the trigger, sear surfaces, and hammer. I took the front sight off and put the combro on, 5.4fpe with 8.4 grain JSB's.

The cocking action is smooth, and now the trigger mod and polish is complete, it feels fantastic.

I'll get it on the range on Sunday to do some accuracy testing and post the results afterwards.

Opinion so far.... Order from Poland, why spend £100 more when you can save it and buy a red-dot or a pistol scope with what you saved 3 working days to receive, i ordered Friday last week and it arrived Yesterday (well, i had to collect it from the post office today as parcelfarce apparently "attempted delivery", but i wouldn't put that down to the seller).

Hilarious bit was trying to explain the receipt to the wife, she calmed down when i explained the 376.38 total was in Polish Złoty, not Pounds

[khamsin]

Well, i have it. Packaged well, and first impressions, very good. You want to know the funny thing?? Order it from poland, and the box/instructions are in ENGLISH!!

Well worth the £77 inc postage and taxes.

I have stripped it to do the trigger mod, and polish/grease the trigger, sear surfaces, and hammer. I took the front sight off and put the combro on, 5.4fpe with 8.4 grain JSB's.

The cocking action is smooth, and now the trigger mod and polish is complete, it feels fantastic.

I'll get it on the range on Sunday to do some accuracy testing and post the results afterwards.

Opinion so far.... Order from Poland, why spend £100 more when you can save it and buy a red-dot or a pistol scope with what you saved 3 working days to receive, i ordered Friday last week and it arrived Yesterday (well, i had to collect it from the post office today as parcelfarce apparently "attempted delivery", but i wouldn't put that down to the seller).

Hilarious bit was trying to explain the receipt to the wife, she calmed down when i explained the 376.38 total was in Polish Złoty, not Pounds

Hi just ordered one

What mods did you do to the trigger?

Thanks Dean

[richierich]

Hi just ordered one

What mods did you do to the trigger?

Thanks Dean

http://ukchineseairgunforum.myfreefo...6-0-asc-70.php for the trigger mod, it sets it back so it gives a shorter pull. It also allows more space in the trigger guard for people with sausage fingers

I didn't do it with a turned brass piece like the link suggests, i used a small square cut off from an old knackered nectar points card and glued it to the underside of the trigger that rests on the stop pin circled in the pic below. This sets back the trigger, and if it's too short a pull, just file off a bit of the plastic card til you get the desired result (i didn't get a pic of the actual mod i did, will do that tonight)

http://img.photobucket.com/albums/v3...ps2nqc8twc.jpg

I took plenty pics of the strip down, Here's one of the polished surfaces i did last night

http://img.photobucket.com/albums/v3...psz9c2du5x.jpg

[Twodoctors]

https://drive.google.com/file/d/0ByO...ew?usp=sharing

If you need a silencer for it, I can highly recommend the Hogan Decimeater. You'll need a 10mm to UHF adaptor as well.

Adrian

[davethepitch]

Is this translation page i have used any use to anyone regarding this Polish website https://translate.google.com/transla...p1_5_5_mm.html

Dave

[hawkeye]

https://drive.google.com/file/d/0ByO...ew?usp=sharing

If you need a silencer for it, I can highly recommend the Hogan Decimeater. You'll need a 10mm to UHF adaptor as well.

Adrian

Where best to get the unf adapter from ?
They are mostly 1/2" unc aren't they