Page 1 of 2 12 LastLast
Results 1 to 15 of 28

Thread: .223 load

  1. #1
    Join Date
    Jun 2012
    Location
    grimsby, North East Lincolnshire
    Posts
    648

    .223 load

    What are your recommended .223 loads for out to 300yards. (fox)
    1:12 twist barrel.
    Tikka .223 Lam, stainless / Marlin 1894 .44 Magnum / Browning Maxus Shotgun Prem grade 3 / CZ 453 Premium .17HMR Joe West Stock / Weihrauch HW100T .177 / Anschutz 1417 22lr T/H
    Open cert, BASC member.

  2. #2
    Join Date
    Jul 2007
    Location
    Wellington
    Posts
    945
    I reload for two .223 One is a Tikka with a custom barrel using 50gr V Max loaded with 25.1gr of N133 the other an RWS factory using 50 gr Nosler BT with 25.3gr of N133 also.
    Teaching probably to the converted but best to refer to the Vhitavuori web site and consider doing the OCW method in say .2gr increments.

  3. #3
    Join Date
    Jun 2012
    Location
    grimsby, North East Lincolnshire
    Posts
    648
    Quote Originally Posted by dicehorn View Post
    I reload for two .223 One is a Tikka with a custom barrel using 50gr V Max loaded with 25.1gr of N133 the other an RWS factory using 50 gr Nosler BT with 25.3gr of N133 also.
    Teaching probably to the converted but best to refer to the Vhitavuori web site and consider doing the OCW method in say .2gr increments.
    Thanks for the info its all appreciated,i have the reloading manuals ect been loading my own 44 mag for a couple of years. its good to know what people are using when its a new cal for me.
    what kind of ranges are you using the loads at ?
    and what kind of groups are you getting.
    Oh and what is the custom barrel ?
    Last edited by ninja_geezer; 18-09-2014 at 06:43 PM.
    Tikka .223 Lam, stainless / Marlin 1894 .44 Magnum / Browning Maxus Shotgun Prem grade 3 / CZ 453 Premium .17HMR Joe West Stock / Weihrauch HW100T .177 / Anschutz 1417 22lr T/H
    Open cert, BASC member.

  4. #4
    Join Date
    Oct 2009
    Location
    Norwich
    Posts
    2,065
    55g VMax
    23.8g of Vhit133
    CCI Benchrest primer
    Hornady Brass

    Spat out of a Howa 1500 1 in 12 and results in a sub half inch hole.

    Used on fox out to about 400 yards max.
    Good deals: longy0710, Antonov, hairlesshunter, Gnome of the Woods, pinguisgod, zx10mike, matt007, Sir slots alot.

  5. #5
    Join Date
    Mar 2010
    Location
    Inverness, Highlands, God's own country.
    Posts
    10,067
    One to try; 1989 RG 5.56 ammo, bullet pulled, powder re-measured to 23.5gns (Original approx. load for 62 gn nato round), 50gn Vmax stuck back on top to normal length & Bob's your Aunty. ba hair under 3400fps from 18" barrel'
    Last edited by DedIdick; 27-09-2014 at 07:43 PM.
    Pistol & Rifle Shooting in the Highlands with Strathpeffer Rifle & Pistol Club. <StrathRPC at yahoo.com> or google it.
    No longer Pumpin Oil but still Passin Gas!

  6. #6
    Join Date
    Jun 2012
    Location
    grimsby, North East Lincolnshire
    Posts
    648
    Quote Originally Posted by grim_reaper View Post
    55g VMax
    23.8g of Vhit133
    CCI Benchrest primer
    Hornady Brass

    Spat out of a Howa 1500 1 in 12 and results in a sub half inch hole.

    Used on fox out to about 400 yards max.
    What kind of velocity are you getting through the chrono ?
    Tikka .223 Lam, stainless / Marlin 1894 .44 Magnum / Browning Maxus Shotgun Prem grade 3 / CZ 453 Premium .17HMR Joe West Stock / Weihrauch HW100T .177 / Anschutz 1417 22lr T/H
    Open cert, BASC member.

  7. #7
    Join Date
    Oct 2009
    Location
    Norwich
    Posts
    2,065
    Never chrono'd it! I find it all to easy to get bent out of shape about how fast my load is, so I took the proactive step of taking the battery out of my F1, putting it in it's drawer, working up a load for accuracy using the aforementioned OCW method and then just shooting.

    I am moving on to a new tub of 133 on the next few weeks I should imagine, I could chrono it then if you like. Whenever I change propellant batch I always drop .5(ish) of a grain and work up again just in case anything changes.
    Good deals: longy0710, Antonov, hairlesshunter, Gnome of the Woods, pinguisgod, zx10mike, matt007, Sir slots alot.

  8. #8
    Join Date
    Jun 2012
    Location
    grimsby, North East Lincolnshire
    Posts
    648
    Quote Originally Posted by grim_reaper View Post
    Never chrono'd it! I find it all to easy to get bent out of shape about how fast my load is, so I took the proactive step of taking the battery out of my F1, putting it in it's drawer, working up a load for accuracy using the aforementioned OCW method and then just shooting.

    I am moving on to a new tub of 133 on the next few weeks I should imagine, I could chrono it then if you like. Whenever I change propellant batch I always drop .5(ish) of a grain and work up again just in case anything changes.
    Thanks i think i may get some 133 to start with as this seem a very popular powder for the cal. also read good things about h335 as well.
    Tikka .223 Lam, stainless / Marlin 1894 .44 Magnum / Browning Maxus Shotgun Prem grade 3 / CZ 453 Premium .17HMR Joe West Stock / Weihrauch HW100T .177 / Anschutz 1417 22lr T/H
    Open cert, BASC member.

  9. #9
    Join Date
    Sep 2006
    Location
    Driffield, East Yorkshire
    Posts
    3,052
    If you have local stockist of Ramshot powders give them a try, TAC or Xterminator are very clean burning powders that give good velocities for their charge weight and at a good price per bang.

  10. #10
    Join Date
    Nov 2006
    Location
    Kettering, Northamptonshire
    Posts
    4,099
    I use 24.0 grains of H322 with Sierra 52 grain HPBT Matchking in my Remington which has the 1:12 twist 26 inch varmint barrel. The whole package gives me 0.3 MOA accuracy, wish I was as good.
    "Government is like a baby. An alimentary canal with a big appetite at one end and no sense of responsibility at the other."

  11. #11
    Join Date
    Jan 2013
    Location
    Devizes
    Posts
    5,032
    Quote Originally Posted by Fenrir.2 View Post
    I use 24.0 grains of H322 with Sierra 52 grain HPBT Matchking in my Remington which has the 1:12 twist 26 inch varmint barrel. The whole package gives me 0.3 MOA accuracy, wish I was as good.
    What do you work on for COAL? I am about to embark on my reloading career and will be reloading .22 hornet, 6.5x55 & .223, it sounds like I have the same remmy set up as you.
    Thanks for looking

  12. #12
    Join Date
    Nov 2006
    Location
    Kettering, Northamptonshire
    Posts
    4,099
    Quote Originally Posted by Boydy47 View Post
    What do you work on for COAL? I am about to embark on my reloading career and will be reloading .22 hornet, 6.5x55 & .223, it sounds like I have the same remmy set up as you.
    2.260 inches
    "Government is like a baby. An alimentary canal with a big appetite at one end and no sense of responsibility at the other."

  13. #13
    Join Date
    Jan 2013
    Location
    Devizes
    Posts
    5,032
    Quote Originally Posted by Fenrir.2 View Post
    2.260 inches
    Cheers
    Thanks for looking

  14. #14
    Join Date
    Jun 2008
    Location
    Bradford, West Yorkshire
    Posts
    899
    Viht n120 with either a 50 grain vmax or a 55 grain Hornady SPWC it's very accurate in my rifle and you use approx 3 1/2 grains less per bang to most other 223 powders so get more fun from a tub.

    Rick
    It's not my faulty, I was just.....

  15. #15
    Join Date
    Jan 2008
    Location
    Mold (Yr Wyddgrug) N.Wales
    Posts
    18,250
    another for Viht 120 with a 52 amax or a nosler BT's 55 grain.

    splendid combo's.......
    Rapid 7 / 10-22 ATN 2 Stiller Predator .204 Pulsar N970 Tikka T3 semi custom ATN MARS thermal.204 Tikka T3 Semi.223 Wylde IOR Operator Lawton 6mmBR Kahles Gen 3 - Stiller 6.5 x 47 Bushnell BDX - Winchester Red Performance SX3 12g

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •