Results 1 to 15 of 28

Thread: .223 load

Hybrid View

Previous Post Previous Post   Next Post Next Post
  1. #1
    Join Date
    Jun 2008
    Location
    Bradford, West Yorkshire
    Posts
    899
    Viht n120 with either a 50 grain vmax or a 55 grain Hornady SPWC it's very accurate in my rifle and you use approx 3 1/2 grains less per bang to most other 223 powders so get more fun from a tub.

    Rick
    It's not my faulty, I was just.....

  2. #2
    Join Date
    Jan 2008
    Location
    Mold (Yr Wyddgrug) N.Wales
    Posts
    18,250
    another for Viht 120 with a 52 amax or a nosler BT's 55 grain.

    splendid combo's.......
    Rapid 7 / 10-22 ATN 2 Stiller Predator .204 Pulsar N970 Tikka T3 semi custom ATN MARS thermal.204 Tikka T3 Semi.223 Wylde IOR Operator Lawton 6mmBR Kahles Gen 3 - Stiller 6.5 x 47 Bushnell BDX - Winchester Red Performance SX3 12g

  3. #3
    Join Date
    May 2014
    Location
    Hockley
    Posts
    23
    24.5g of RL15 pushing a 69g sierra match out of a 1:9 remy police.
    One ragged hole at 300yds and good out to 600yds in light wind, though not for fox at that range obviously.

  4. #4
    Join Date
    Jun 2012
    Location
    grimsby, North East Lincolnshire
    Posts
    648

    latest efforts

    These are my latest efforts at .223 handloads, taken at 110 yards lasered.(indoor tube range) 3 shot groups.
    N-133
    Fed primers
    Lapua brass
    50 grain V-Max .
    oal=2.245
    the shot on the 24.9 gn target was me not the rifle think it would have been a tidy group otherwise.
    these are all uncrimped,may try a few using the lee factory crimp die next.
    the 3 bullets through 1 hole i dont think i will ever repeat ! 25.1 gn load.
    liking my T3 so far
    now need to find charlie.


    http://i1053.photobucket.com/albums/...103_182149.jpg
    Tikka .223 Lam, stainless / Marlin 1894 .44 Magnum / Browning Maxus Shotgun Prem grade 3 / CZ 453 Premium .17HMR Joe West Stock / Weihrauch HW100T .177 / Anschutz 1417 22lr T/H
    Open cert, BASC member.

  5. #5
    Join Date
    Apr 2008
    Location
    Nuneaton
    Posts
    1,350
    Quote Originally Posted by ninja_geezer View Post
    These are my latest efforts at .223 handloads, taken at 110 yards lasered.(indoor tube range) 3 shot groups.
    N-133
    Fed primers
    Lapua brass
    50 grain V-Max .
    oal=2.245
    the shot on the 24.9 gn target was me not the rifle think it would have been a tidy group otherwise.
    these are all uncrimped,may try a few using the lee factory crimp die next.
    the 3 bullets through 1 hole i dont think i will ever repeat ! 25.1 gn load.
    liking my T3 so far
    now need to find charlie.


    http://i1053.photobucket.com/albums/...103_182149.jpg
    Was that with a 1/12 twist or 1/9

    BBF
    "The grass is always greener on the other side"

  6. #6
    Join Date
    Jun 2012
    Location
    grimsby, North East Lincolnshire
    Posts
    648
    Quote Originally Posted by Blackbaronfish View Post
    Was that with a 1/12 twist or 1/9

    BBF
    1:12 twist
    Tikka .223 Lam, stainless / Marlin 1894 .44 Magnum / Browning Maxus Shotgun Prem grade 3 / CZ 453 Premium .17HMR Joe West Stock / Weihrauch HW100T .177 / Anschutz 1417 22lr T/H
    Open cert, BASC member.

  7. #7
    Join Date
    Jun 2005
    Location
    leeds, west yorkshire
    Posts
    12,967
    Quote Originally Posted by C.Eaton View Post
    24.5g of RL15 pushing a 69g sierra match out of a 1:9 remy police.
    One ragged hole at 300yds and good out to 600yds in light wind, though not for fox at that range obviously.
    His is a 1 in 12 twist so I don't think it will stabilise a 69gn bullet
    When I first bought my rem 700 which is 1 in 12 too I bought a load of rg ammo just for the cases etc but I fired them off....couldn't hit a barn door
    You can pull the bullet and re use a vmax instead with great results but I just reused the brass and borrowed night stalkers load of 21.9 gn of vit 120 and a 50gn vmax bullet.....bingo

  8. #8
    Join Date
    Jun 2005
    Location
    leeds, west yorkshire
    Posts
    12,967
    Quote Originally Posted by Night Stalker View Post
    Viht n120 with either a 50 grain vmax or a 55 grain Hornady SPWC it's very accurate in my rifle and you use approx 3 1/2 grains less per bang to most other 223 powders so get more fun from a tub.

    Rick
    i just pm him with our special load

  9. #9
    DaveK is offline Has been known to tickle spider crabs
    Join Date
    Oct 2005
    Location
    Wakefield
    Posts
    1,817
    Quote Originally Posted by loiner1965 View Post
    i just pm him with our special load
    The Seacroft Special?

    23gn of white powder sniffed up by the cartridge perhaps?

  10. #10
    Join Date
    Jun 2005
    Location
    leeds, west yorkshire
    Posts
    12,967
    Quote Originally Posted by DaveK View Post
    The Seacroft Special?

    23gn of white powder sniffed up by the cartridge perhaps?
    Lol. It works dave trust me
    Anyway those lads in sea croft play with bigger guns than .223

  11. #11
    Join Date
    Jun 2005
    Location
    leeds, west yorkshire
    Posts
    12,967
    Quote Originally Posted by DaveK View Post
    The Seacroft Special?

    23gn of white powder sniffed up by the cartridge perhaps?
    My niece lives on cow lane near you so be very careful lol

  12. #12
    Parabuteo is offline My Chrony has bought it a couple of times...
    Join Date
    Mar 2006
    Location
    Southampton
    Posts
    6,061
    Just a thought....I dont load for 556 yet but.

    Given the agro getting some powders, why not give RS40 a try? It is a dedicated 556 powder used in military loads. Nigel may well let you have a small amount to try.
    I'm a maggot in another life you know

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •