Reply With QuoteYou can nip them up with spanner mate, just don't go swinging on them
Exceedingly Good Bloke
Im using Lee dies that i find the lock nuts move quite easily. Once i have found the setting i want ,i would like to lock them in place.
Other dies ive seen have a grub screw on the lock nut. Has anyone got a fix for this problem.
I have seen quick change bushes,but im not sure if that would do it.
BBF
"The grass is always greener on the other side"
Registered User
You can nip them up with spanner mate, just don't go swinging on them
Quite good in a crisis
Thread lock, or buy a set of locking rings
Do nothing, achieve nothing
Exceedingly Good Bloke
Locking nuts sounds like a good idea.
BBF
"The grass is always greener on the other side"
Elvis Floppyfeet
or drill / tap / and insert a grub screw in the locking ringOriginally Posted by Blackbaronfish
email...... stephenbarrow@ntlworld.com
Registered User
The quick change ones are good I use them in one press but I found out what you say in another press so what I did was to set the die where I wanted it and then run some tape around the die other the nut and die now I just screw the die back in and out it worked ok for me
Registered User
you can get locking rings for Lee dies, complete with grubscrews etc - I bought a pack of three from a certain auction site for under £3 - or try your local reloading equipment stockist.
"Peace is that brief glorious moment in history, when everybody stands around reloading" -- Thomas Jefferson
N.S.R.A. RCO, Club Instructor, Club Coach.
Registered User
Got mine from SYSS. Tim
Registered User
I put hornady lock rings on all of mine. There very good.
Vulpes Sicarius
i think theyre interchangeable........but i got a second set with a nyloc inner which work well
Rapid 7 / 10-22 ATN 2 Stiller Predator .204 Pulsar N970 Tikka T3 semi custom ATN MARS thermal.204 Tikka T3 Semi.223 Wylde IOR Operator Lawton 6mmBR Kahles Gen 3 - Stiller 6.5 x 47 Bushnell BDX - Winchester Red Performance SX3 12g
“Junes1 is a whining bellend”
RIP Lee.
"An infinite number of monkeys banging away at type writers for an infinite period of time will eventually reproduce Hamlet" Thanks to discussion forums we now know this to be untrue.
Slightly camp, makes decent chilli, and has a box of tissues and a can of 3 In 1 in the gun room
RIP? Huh?RIP Lee.
Not camp, Gary just wishes I were!
Smurf me up!
Lee . Dies
Well I got it Graham !
.
Registered User
There still trading mate, not gone bust
Good gear Lee use it all the time, been loading for years
There this, should be ok for you
http://www.henrykrank.com/index.php?...oducts_id=1552
or some cheap ones
http://www.henrykrank.com/index.php?...oducts_id=1941
Slightly camp, makes decent chilli, and has a box of tissues and a can of 3 In 1 in the gun room
I got it about an hour later, I was a bit slow yesterday!
Not camp, Gary just wishes I were!
Posting Permissions