Exceedingly Good Bloke
Im using Lee dies that i find the lock nuts move quite easily. Once i have found the setting i want ,i would like to lock them in place.
Other dies ive seen have a grub screw on the lock nut. Has anyone got a fix for this problem.
I have seen quick change bushes,but im not sure if that would do it.
BBF
"The grass is always greener on the other side"
Registered User
You can nip them up with spanner mate, just don't go swinging on them
Quite good in a crisis
Thread lock, or buy a set of locking rings
Do nothing, achieve nothing
Exceedingly Good Bloke
Locking nuts sounds like a good idea.
BBF
"The grass is always greener on the other side"
Elvis Floppyfeet
or drill / tap / and insert a grub screw in the locking ringOriginally Posted by Blackbaronfish
email...... stephenbarrow@ntlworld.com
Registered User
The quick change ones are good I use them in one press but I found out what you say in another press so what I did was to set the die where I wanted it and then run some tape around the die other the nut and die now I just screw the die back in and out it worked ok for me
Posting Permissions
Reply With Quote