Results 1 to 15 of 23

Thread: Hornet K

Hybrid View

Previous Post Previous Post   Next Post Next Post
  1. #1
    Join Date
    Jan 2013
    Location
    Devizes
    Posts
    5,032
    Quote Originally Posted by angrybear View Post

    Highest recorded velocity was 3436fps Barns 30gn with 12.5gn
    Screaming along! might have to get some and see what they do in the standard hornet with 13gr behind them!
    Thanks for looking

  2. #2
    Join Date
    Jun 2014
    Location
    Lancaster
    Posts
    314
    Boydy - just get a few to test with, the Barnes were terrible in my CZ, all over the place. I ended up giving 3/4 of a box away.

  3. #3
    Join Date
    Sep 2010
    Location
    Exeter
    Posts
    35,861
    Quote Originally Posted by Eligus View Post
    Boydy - just get a few to test with, the Barnes were terrible in my CZ, all over the place. I ended up giving 3/4 of a box away.
    Mines also a CZ 527 groups were not as tight with lighter loads 12-12.5-13gn but the 13.5 was a raged single hole.

    got some done to try at 100-150yds when I get the chance.

  4. #4
    Join Date
    Jan 2013
    Location
    Devizes
    Posts
    5,032
    Quote Originally Posted by angrybear View Post
    Mines also a CZ 527 groups were not as tight with lighter loads 12-12.5-13gn but the 13.5 was a raged single hole.

    got some done to try at 100-150yds when I get the chance.
    I think I'd struggle to get more than 13 in the case, definitely wont get 13.5 in apparently rem brass is a bit more roomy and will take up to 14 grains of some powders.

    Hmmmm k hornet reamer perhaps
    Thanks for looking

  5. #5
    Join Date
    Sep 2010
    Location
    Exeter
    Posts
    35,861
    Quote Originally Posted by Boydy47 View Post
    I think I'd struggle to get more than 13 in the case, definitely wont get 13.5 in apparently rem brass is a bit more roomy and will take up to 14 grains of some powders.

    Hmmmm k hornet reamer perhaps
    or a different powder ?
    H110 maybe, my book quotes 12.3gn as max load with 35gn V-max for 3100fps in a std case.

  6. #6
    Join Date
    Jan 2013
    Location
    Devizes
    Posts
    5,032
    Quote Originally Posted by angrybear View Post
    or a different powder ?
    H110 maybe, my book quotes 12.3gn as max load with 35gn V-max for 3100fps in a std case.
    Yeah that's a good point, the hodgdon site gives the same weight for the max load for the 30 gainers out of the standard case, giving 3150 fps
    Thanks for looking

  7. #7
    Join Date
    Sep 2010
    Location
    Exeter
    Posts
    35,861
    Well I had a nice afternoon re-zeroing, having changed mounts to a weaver rail to get the correct eye relief, and It definitely seems to like the 30gn barns @ 13.5gn lilgun,
    easy sub 1/2" groups at 50yds & 1" at 100yds. I suppose I ought to try some fine tuning at 0.1gn increments to see if I can get down to 1/2" at 100yds

    Unfortunately the V-max 35gn @13.5gn were only doing 1.5" at 100yds so I guess a bit more testing of those is required.

    I can see this rapidly becoming addictive

  8. #8
    Join Date
    Jun 2014
    Location
    Lancaster
    Posts
    314
    I can see this rapidly becoming addictive

    Too late !!!

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •