Anschutz 335

[Amac]

Hi folks,
Just wondering if any of you have a 335 knocking about that you might be willing to let go to a new home. I am well aware that you have a couple of fine examples within the armory Ian but know that they will be staying locked in the North West "Airgun Vaults" for eternity no doubt.
Please drop me a line if you have a gun that fits the bill.
Thanks!
Andy

[I. J.]

Hi folks,
Just wondering if any of you have a 335 knocking about that you might be willing to let go to a new home. I am well aware that you have a couple of fine examples within the armory Ian but know that they will be staying locked in the North West "Airgun Vaults" for eternity no doubt.
Please drop me a line if you have a gun that fits the bill.
Thanks!
Andy

B.A.R. have one in the s/h section.

Always willing to help - should be my motto.

ATB
Ian

p.s. Dont tell Ron.

[Amac]

Typically, my college employers have kindly decided to filter out anything with "gun" in it. Will have a look when home. Thanks and see you tomorrow!

[I. J.]

Then GOOGLE 'half wit' and see if it comes up with the lads at B.A.R.

[weebster]

Snap. I am after a mk2 .22 version (or 3) as well for old times sake,....there is a mk1 335 in the free ads can't remember price or locality though

[Mach 1.5]

Just picked up a MK1 myself in .177 very under rated rifle. Mach 1.5

[weebster]

wil95k your inbox is full

[Unframed Dave]

One (.22) on free ads located in Ely.

Dave

[derekj]

Worcester Black Powder supplies ran by a guy called David Jenkins(i think that's right) did a 12ftlb conversion on the 335. Also Theoben did a 335 gas ram conversion. Does anyone remember that one? Lovely little rifles built to a standard and not to a price(webley vulcan) Derek

[trick cyclist]

And I've recently picked up a target version, but with a very funny little dioptre on the back, certainly not an Anschutz one. Trigger needs some work compared to my FWB 127.

[Stuart_B]

And I've recently picked up a target version, but with a very funny little dioptre on the back, certainly not an Anschutz one. Trigger needs some work compared to my FWB 127.

That's what put me off the one I used to have. Went from shooting HW rekord trigger/fwb300s to a 335 and found the trigger far too heavy. Wish I kept it a bit longer and gave it more time.

[fatttmannn]

And I've recently picked up a target version, but with a very funny little dioptre on the back, certainly not an Anschutz one. Trigger needs some work compared to my FWB 127.

the "funny_ little dioptre" is a Wiliams peep sight_American and a quality product- made for the Anschutz), and the triguer isnt that bad , has the fwb is crap comparded to the HW,s and yes I opwn all of the above guns.

[trick cyclist]

the "funny_ little dioptre" is a Wiliams peep sight_American and a quality product- made for the Anschutz), and the triguer isnt that bad , has the fwb is crap comparded to the HW,s and yes I opwn all of the above guns.

I imagined it was a Williams of some sort - there is no branding, and it is very low profile, with a tiny dioptre hole.

Agreed, the 127 is not that great itself, just that my 335 has been adjusted so that there is no discernible difference between stages 1 and 2, and the let off is a surprise. Have not had chance to sort it out yet.

Of course, neither is a patch on my 300S.

[fatttmannn]

I imagined it was a Williams of some sort - there is no branding, and it is very low profile, with a tiny dioptre hole.

Agreed, the 127 is not that great itself, just that my 335 has been adjusted so that there is no discernible difference between stages 1 and 2, and the let off is a surprise. Have not had chance to sort it out yet.

Of course, neither is a patch on my 300S.

agree, the triguer on my Diana/ Original 75 and my HW55T are both revalations, enjoy.

[gingernut]

I had the same trigger on my Target model.
But a little adjustment made it ok.

Mine has a Walther diopter.