JSB Exstacts

[naffer]

Now this a very big please, have any of you good chap on here a tin of JBS Extact pellets .177 at 8.44 gr,
Could you ,,please coul you tell me what there weights are over say 20to30 pellets ,it should be aprox around ish that weight . I have brand new tin here and was testing a new HuMa reg with them(nothing wrong with the reg by the way,,lush)I could not test it with them at all I had to use RWS super domes in the end,,why you ask,well,I weighed some and the 50 after that,not one say oh dear what is wrong here,
I find the weights went from 8.2 up as far as 9.4gr out of 50 pellets weighed ,most were 9gr a lot were 8.8
gr,8.6gr,whay TF is wrong .I have new se of scales ,my super domes are near as dam it...my biz super
fields are brill.i made sure that scales are cal right and I get that From JBS pellets.Could you help please,they came from a fresh tube of pellet I got from the club Sunday last, ta ,,pops

[hmangphilly]

thats a large spread in weights fella , maybe a dicky batch.
whats the numbers on the sticker on the back of the tin?

[chrisbaker42]

I'm very interested in the outcome of this, I have a tin of JSB Exacts 4.51 that are shooting all over the place, unfortunately I don't have anything that will weigh them accurately.

[naffer]

thats a large spread in weights fella , maybe a dicky batch.
whats the numbers on the sticker on the back of the tin?

Here's the batch number. 1020014 at 4.52 is that what you want,,,fella,,,,,,,,,,pops

I got the tin from my club stock of pellets to do a test on my new HuMa regulator with but the readings were all over the place ,being a good brand of pellets ,yeah right, but having weighing them I was , well not happy . I have RWS super domes and they are great but as for the JSBs must be a bad batch and who said that air arms pellets and JSBs are the same I'm not sure on that one.The only thing I've seen bad about A/A pellets is the damaged one in the tin.

[Vic Thompson]

In the hope of in part answering your question I weighed 30 pellets from one of my tins of JSB Exact Pellets Batch Number 44000013, cal 4.53 mm, and obtained the following results using a "My Weigh i201" balance and a " Pact Digital Precision Powder Scale". Each pellet was weighed sequentially on the two machines in the order of : My Weigh/Pact

8.3/8.4 8.3/8.5 8.4/8.4
8.3/8.4 8.3/8.3 8.4/8.3
8.3/8.4 8.3/8.5 8.5/8.4
8.4/8.4 8.5/8.6 8.5/8.5
8.4/8.3 8.3/8.3 8.3/8.3
8.3/8.5 8.5/8.6 8.3/8.3
8.3/8.4 8.4/8.3 8.3/8.3
8.5/8.4 8.3/8.3 8.5/8.5
8.4/8.5 8.4/8.5 8.5/8.5
8.4/8.3 8.5/8.4 8.4/8.4

Weights are in grains to one DP and at the end of the exercise the weights for the total sample on each of the balances in sequence was 252.6/253.0 gns.

The results look fairly consistant to me considering the use of "home user" grade weighing equipment, all but 8.4 gn +/- 0.1 gn.

HTH, Vic Thompson.

[naffer]

In the hope of in part answering your question I weighed 30 pellets from one of my tins of JSB Exact Pellets Batch Number 44000013, cal 4.53 mm, and obtained the following results using a "My Weigh i201" balance and a " Pact Digital Precision Powder Scale". Each pellet was weighed sequentially on the two machines in the order of : My Weigh/Pact

8.3/8.4 8.3/8.5 8.4/8.4
8.3/8.4 8.3/8.3 8.4/8.3
8.3/8.4 8.3/8.5 8.5/8.4
8.4/8.4 8.5/8.6 8.5/8.5
8.4/8.3 8.3/8.3 8.3/8.3
8.3/8.5 8.5/8.6 8.3/8.3
8.3/8.4 8.4/8.3 8.3/8.3
8.5/8.4 8.3/8.3 8.5/8.5
8.4/8.5 8.4/8.5 8.5/8.5
8.4/8.3 8.5/8.4 8.4/8.4

Weights are in grains to one DP and at the end of the exercise the weights for the total sample on each of the balances in sequence was 252.6/253.0 gns.

The results look fairly consistant to me considering the use of "home user" grade weighing equipment, all but 8.4 gn +/- 0.1 gn.

HTH, Vic Thompson.

Thanks for that and your effort in this, it's very good of you ,so with this I must have a very bad tin full ,
But what I can't understand is its nearly all the tin not just say 50 or 60 pellets but 90% of them ?? Don't
get it ?? Pops

[Steyr]

contact jsb