Nothing on the English shot size chart on here
http://www.hallowellco.com/shot_size_chart.htm
Because it appears to be an American buck shot size as link below
http://www.sellier-bellot.cz/shotgun-table-shots.php
Been trying to find what size 8.1mm lead shot is now , I thought it was SG but opened up a shell and they were near 9mm , is there a company still doing them but not 3" magnums ?
a gun is just a tool how its used is dependant on the person behind the trigger .
This is why constant restrictions on legal users will have no effect on the unlawfull use of guns or knives !
Nothing on the English shot size chart on here
http://www.hallowellco.com/shot_size_chart.htm
Because it appears to be an American buck shot size as link below
http://www.sellier-bellot.cz/shotgun-table-shots.php
Thanks for looking
How about Rottweil express spec SG ?
2.5"-2.75" chambers, 12 x 7.5mm pellets.
If you're after 2 3/4" cartridges rather than shot for reloading Gamebore buffalo range might help.
http://www.dauntseyguns.co.uk/products.php?cat=16221
Thanks for looking
Yes I checked the English one , on your chart US 0 buck is 8.13 mm that would be ideal , so I assume Remington, Peters or Winchester if any can be found would all be 0 buckshot , I have tried to get the shot to reload but as I only want one box its just tracking it down .
tried C&G as could collect at a show but they didn't have any .
a gun is just a tool how its used is dependant on the person behind the trigger .
This is why constant restrictions on legal users will have no effect on the unlawfull use of guns or knives !
I make .375 for my 36 cal pistol, which is 9.5 ish mm,
would these be to big for what your after,
.319 =8.1mm you can get this size mould from Kranks for £20 and make your own,
I make my own from scrap lead you can get a buck shot mould but don't know what size it is but did buy some 6/0 that was around aaa size
i guessed at 8.6mm?
Good deal, Paramainiac 20-05-07
Good deal, Snipperuk 11-09-10
Good deal, Skygrowler 13-10-10
On the ELEY shot size chart SG = 8.4mm. .330"
LG = 9.1mm. .360"