12g hushpower load data

[12gauge]

hi after some 12g hushpower load data
anyone help out

[frontend loader]

subsonic-
70mm Case.
CX2000 primer.
17grain Vectan AS
4mm Over Powder Card.
20mm Diana Fibre.
32gm #4 lead shot.
Star crimp.
940fps

enjoy!

[cookoff013]

70mm Case.
CX2000 primer.
17grain Vectan AS
4mm Over Powder Card.
20mm Diana Fibre.
32gm #4 lead shot.
Star crimp.
940fps

you may want to pop in 18 grains, as the mod knocks off some speed from data.
i know this load well. real well actually.

[12gauge]

ok thanks for that but any other data for other powders

[frontend loader]

Is there a powder that you were thinking of using?

[12gauge]

I have red dot / blue dot / green dot / A1 & some 410 powders like 410 & 2400

[cookoff013]

check out titewad in 1,1/8oz loads.

i`ve done the subsonic shells alot. the posted load is as good and cheap as it gets.

i`ve done 1oz and 21gram subsonics. this vectan AS is as simple and easy and cheaper than any other subsonic load, the AS load is the most accessible sub load ever. it uses normal components.

[cookoff013]

red dot, 1,1/8oz loads.

cook.

[cookoff013]

bout 17 grains red dot would get you just transonic. plastic wad cheddite primer 1,1/8oz lead, in a cheddite hull.
check alliant data. 18 grains is there. i just knocked off a grain.

[Junes1]

Data without pressures is always dubious and bad practice to use.