BP Loading Stand

[Mac42]

Any kind person like to build me a quality revolver loading stand in timber to take a Pedersoli Remington. I am not a carpenter but have seen some really nice ones. Of course I will pay for this stand to be made. Any help available. I have never used the loading rig where you remove the cylinder and load that way, not sure which is the best method as the separate loading does not put any pressure on the gun itself. Open to all ideas.

[WarrenC]

I've used both a seperate rig for both and one for loading the gun standing up. If traditional nipples is go with what you want if you want to load cylinders on there own I'd suggest 'biglube.com'
Tower of power, I run a lot of competitions and the speed I can load cylinders of all types is very fast, and it does all calibers, if you want an odd ball he will make it for you. It's from the states and takes less than a week to arrive. Guy is a real gem to deal with.

Hope this helps

[bfhb]

Google "Lazy Git Loading Press"

Mark

[WarrenC]

Google 'man tries to help'
Get's a few reviews but same result.
😎

[airgunnut]

http://i1067.photobucket.com/albums/...mporary-53.jpg
http://i1067.photobucket.com/albums/...mporary-52.jpg
http://i1067.photobucket.com/albums/...mporary-50.jpg
I'm no wood worker bit I made this effort with a few bits of plywood (the back is 3 bits glued together), exterior grade wood glue, a junior hack saw, a file, a nail gun (optional, normal nails work just fine) it later had 3 coats of yacht varnish

[bfhb]

http://www.lazygit.biz/menu.html

Nice cylinder loader available made to measure in the UK.

Mark

[Mac42]

Google "Lazy Git Loading Press"

Mark

Just ordered one. Very nice chap to have a chat with,